Online Access Free HP0-Y45 Practice Test

Virtual Connect Flex-10 technology can divide a single 10GbE port into how many individual network connections?

• A.10
• B.5
• C.2
• D.4

Refer to the exhibit.

A network architect is planning a voice over IP (VoIP) solution for a customer. A computer connects to each VoIP phone, which is Link Layer Discovery Protocol Media Extensions (LLDPMED) capable and supports 802.1X. The Phone then connects to the Ethernet jack. The design currently calls for edge ports to enforce 802.1x to a wireless Network Policy Server (NPS), and RADIUS policies assign users to VLANs based on their identity.
How should the network architect plan VLANs for the VoIP phones?

• A.Make sure that RADIUS policies assign each VoIP phone to the same VLAN that is expected for users.
• B.Plan a voice VLAN for each IRF group. Use LLDP.MED and the voice VLAN definition on edge ports to assign the VLAN to phones.
• C.Plan a voice VLAN that is associated with dynamic user VLAN. Make sure that RADIUS policies specify that as the tagged VLAN.
• D.Disable 802.1X on the phones so that they are placed in the same reason, and use the same VLAN, as the authenticated user on the computer.

Refer to the exhibit.

The exhibit shows the topology for an enterprise campus LAN.
The customer has these additional requirements:
-Employees willneeds a wireless networkthat they will use as asecondaryform of access
-The customer expectsbetween 300 and 400simultaneousclients.
-PCI DSS 2.0 level securityfor the WLANs encryptionand authentication.
-Employeesneed tobe able toroam seamlesslybetween any APs.
The network architect has planned for 16 APs.
Base on these requirements, what does the network architect need to consider when selecting Wireless products?

• A.The APs must support 802.11n and have dual radios.
• B.The APs must support wireless sensor capabilities and have dual radios.
• C.The controller must support centralized forwarding of employees traffic (Premium Mobility license).
• D.The controller requires additional user license as well as additional AP licenses to support the high number of clients per-AP.

Refer to the exhibit.

The exhibit shows how two NICs on a physical server connect to two HP 5820 switches. The server supports eight virtual machines (VMs) with VMware version 5.1. A virtual switch is bound to NIC 1 and NIC 2. The switch implements source MAC load balancing for the NIC team. Ports 1/0/1 and 2/0/1 are Comware trunk ports.
What is the proper configuration for their permitted VLAN IDs and native or port VLAN ID (PVID)?

• A.The ports permit VLANs 10 and 20 and use PVID 20
• B.The ports permit VLANs 10 and 20 and use PVID 1
• C.The ports permit VLANs 10 and 20 and use PVID 10
• D.The ports permit VLANs 10 and 20 both of which are the PVID

HOTSPOT
A network architect designing HP addresses for a customer. The network architect is planning a core routing solution and these VLANs:
-Management (network infrastructure) -Guest -Employees_Wired_Floor1 -Consultants_Wired_Floor1 -Voice_Floor1 -Consultants_Wireless -Employees_Wireless
The customer requires access control lists (ACLs) that control users according to their identity, guest, employee, or contractor. As far as access control is connected, the customer does not care about whether a user has wireless or wired access.
Which scheme enabled ACLs to use the forest rules to control users according to the customer requirements? (Drag and Drop the marker on the scheme)

Correct Answer: