Online Access Free HP0-Y50 Practice Test

An architect is planning an HP Wired-WLAN solution for an office with approximately 4000 users who will use the wireless network rather heavily and who need to roam seamlessly. The solution will have 256 MSM 460 APs. What is one reason for using two HP Wired-WLAN controllers for this solution?

• A.Forwarding trafficthroughtwo controllers can prevent a bottleneck due to heavy usage.
• B.The customer needs fast roaming, which requires a mobility solution between two controllers.
• C.Each Wired-WLAN controller can only support 2000 users.
• D.Each Wired-WLAN controller can only support 128APs.

Refer to the exhibit.

The exhibit shows the topology for an enterprise LAN with an on-site data center. The intelligent Resilient Framework (IRF) group of HP 5500 Series switches supports a group of computers that require very high availability to the data center. Therefore, the customer has requested a backup gigabit fiber link implement Open Shortest Path First (OSPF) in a single area.
Which tasks should the network architect complete to ensure that the HP 5500 IRF group selects the correct path to the data center during normal operation?

• A.Set the cost on the VLAN 100 interfaces to 2 Set the cost for the VLAN 101 interfaces to 80
• B.Change the reference bandwidth on the VLAN 101 interfaces to 1000
• C.Change the reference bandwidth on the VLAN 100 interfaces to 20000
• D.Change the reference bandwidth to 80000 on all routing devices
• E.Change the VLAN 101 interfaces as silent interfaces

A network architect is planning an HP Unified Wired-WLAN solution for an office. The wireless network must support:
What is one reason for using two HP 10500/7500 20G Unified Wired-WLAN modules as the controllers for this solution?

• A.One module is required for traffic processing, and the other is required for key caching to enable roaming
• B.The Unified Wired-WLAN modules can be licensed and configured to provide redundancy for each other
• C.The customer needs fast roaming, which requires a mobility solution between two Unified Wired-WLAN modules
• D.One module is required to control the APs, and the other is required for traffic processing

Refer to the exhibit.

A network architect has planned redundant links as shown in the exhibit. What should the network architect do to ensure that the redundant link design is truly resilient?

• A.Implement the features such as link aggregation, backplane stacking, and intelligent Resilient Framework (IRF)
• B.Add another link between the Layer 2 switches and the core so that up to the two links can fail
• C.Make sure that each HP 10508 switch is configured as a root in one Multiple Spanning Tree Protocol (MSTP) instance
• D.Implement a feature such as bidirectional forwarding detection (BFO) on each redundant link

The customer wants to assign users to VLANs dynamically based on their Windows group. The company Windows Network Policy server provides the assignments. Each of the Windows groups includes between 100 to 600 users.
Which issue does the architect need to resolve?

• A.The switch-to-switch links should not carry so many VLANs.
• B.The plan for the edge ports is incorrect they should be trunk ports that support multiple VLANs.
• C.The proposed dynamic VLANs have too many potential users for the proposed subnets.
• D.The proposed switches do not accept dynamic VLAN assignments from Windows NPS servers.