Online Access Free HP0-Y52 Practice Test

A network administrator enters this command on an HP Comware switch:
<Comware> save In interactive mode, the administrator is prompted to save to a file named config.cfg and confirms the save. What is the effect of these actions?

• A.The current configuration is saved to config.cfg on a TFTP server but is not used for the startupconfig.
• B.The startup-config, rather than the correct configuration, is saved to config.cfg on a TFTP server.
• C.The current configuration is saved to config.cfg in the flash but is not used for the startup-config.
• D.The current configuration is saved to config.cfg in the flash and is used for the startup-config.

Refer to the exhibit.

Which endpoint or endpoints receive broadcast ARP requests sent by EndpointA?

• A.EendpointB and EndpointC only
• B.EndpointB only
• C.EndpointB, EndpointC, and EndpointD
• D.EndpointC only

Refer to the Exhibit.

A network administrator needs to configure DHCP on SwitchA. Assume that SwitchA is an HPE Comware switch and is using the default settings for DHCP. The administrator configures the following information: The administrator then has the DHCP client try to acquire addressing information, but the process fails. What should the administrator do to solve this problem?

• A.Execute the routing command on Switch
• B.Enable DHCP Snooping on SwitchA.
• C.Execute the dhcp enable command on SwitchA.
• D.Configure DHCP relay on SwitchB.

Refer to the exhibit.

What does the output indicate about GE1/0/1?

• A.The interface accepts untagged traffic, which it assigns to VLAN 1. It accepts traffic that is tagged for any VLAN between 10 and 20.
• B.The interface accepts untagged traffic, which it assigns to VLAN 1. It also accepts traffic that is tagged for VLANs 10 and 20.
• C.The interface accepts untagged traffic, which it assigns to VLAN 1. It drops traffic that is tagged for VLANs 1, 10, and 20.
• D.The interface does not accept untagged traffic. It accepts traffic that is tagged for VLANs 1, 10, and 20.

How does Open Shortest Path First (OSPF) help enterprises meet their high availability requirements, compared to RIP?

• A.OSPF is usually easier to troubleshoot if problems occur
• B.OSPF has a resilient, non-hierarchical design
• C.OSPF provides faster convergence.
• D.OSPF uses less CPU during routing updates