Online Access Free HP2-K35 Practice Test

You are designing a solution based on an HP StoreOnce Backup System. You need to verify that your design is supported by the customer Linux environment. Which tool should you use to accomplish this?

• A.SPOCK
• B.HP Storage Sizer Tool
• C.HP Storage EBS Compatibility Matrix
• D.HP Product Bulletin

The following message appears on the D2D StoreOnce system at the customer site:
The RAID has failed catastrophically, no RAID devices are available
What is a possible reason for this error?

• A.You have to change the boot order to boot from the USB stick.
• B.The BIOS cannot find the boot loader and needs to be reset.
• C.The HP Smart Array RAID Controller has failed and needs replacing.
• D.There are two faulty disks within the RAID 6, and all data will be lost.

How do you reconfigure an HPD2D4312 to connect to the LAN environment after migration to firmware revision 3.5?

• A.Make sure that the lower port (Port 1) is used because this is the default port that is enabled with static IP 192.168.2.1.
• B.Remove any connected network cables from the lower two 1GbE network ports and re-locate them to the upper ports.
• C.Remove any connected network cables from the upper two 1GbE network ports and re-locate them to the lower ports.
• D.Make sure that the lower port (Port 2) is used because this is the default port that is enabled with static IP 192.168.1.10.

Which feature is exclusive to the HP StoreOnce B6200 Backup System?

• A.ESLG3 emulation
• B.Catalyst support
• C.10Gb Ethernet
• D.Node fail-over

Which software can you use to manage deduplication and data movement in an HP StoreOnce Catalyst environment? (Select two.)

• A.HP Data Protector
• B.CAArcServe
• C.Symantec NetBackup
• D.EMC NetWorker
• E.CommVaultSimpana