Online Access Free HP2-T25 Practice Test

A customer has an HP Integrity rx2800 i2 server with one processor and two memory risers, each with four DIMMs. The customer added an additional memory riser with four memory DIMMs, but cannot see the additional memory at the operating system level. The customer already swapped the first memory riser with the new one, but there is no change.
What could cause this issue?

• A.An additional license is needed for using more than two memory risers.
• B.An additional processor is needed for using more than two memory risers.
• C.The new memory riser is faulty.
• D.One of the new DIMMs is faulty.

What is the first step when creating a NIC team using NCU?

• A.Configure the team IP address.
• B.Select team members.
• C.Choose team type.
• D.Set IP of each NIC to be used in the team.

Which RAID level allows the data to be striped across multiple RAIDs? (Select two.)

• A.RAID 5
• B.RAID 1
• C.RAID 0
• D.RAID 60
• E.RAID 50

A customer has a Smart Array P812 controller in a DL380 G7 server.The customer wants to move from
RAID 5 to RAID 6 for increased fault tolerance.RAID 6 is not listed as an option in the ACU.
What is the most likely cause? (Select Two.)

• A.The SAAP license key is not in ORCA
• B.The controller firmware must be upgraded
• C.The incorrect license was entered in the RBSU
• D.The Smart Array BIOS is configured incorrectly
• E.The Smart Array Advanced Pack must be purchased

You have a P421/1GB FBVVC with three hard disks configured as RAID 5. What is the minimum requirement to upgrade the disk's configuration to RAID 60?

• A.BBWC
• B.Threemore hard disks
• C.Fivemore hard disks
• D.Smart Array Advanced Pack 2.0