Online Access Free HP2-Z29 Practice Test

Which IRF configuration, in the correct order, includes the physical interfaces in an IRF port?

• A.Option D
• B.Option C
• C.Option A
• D.Option B

Refer to the network exhibit.

A network administrator needs to configure DHCP on an HP Comware switch. The network administrator configures the following information:
[SwitchA] dhcp relay server-group 1 10.1.1.1
[SwitchA] interface vlan-interface 1
[SwitchA-Vlan-interface1] dhcp select relay
[SwitchA-Vlan-interface1] dhcp relay server-select 1
After setting up DHCP relay, the network administrator has the DHCP client try to acquire addressing information, but the process fails. What should the network administrator do to solve this problem?

• A.Execute the dhcp enable command on Switch
• B.Configure DHCP relay on SwitchB.
• C.Enable DHCP Snooping on SwitchA.
• D.Execute the routing command on SwitchA.

What is a key emerging standard protocol that HP Virtual Application Networks (VAN) use
to implement Software-Defined Networks (SDN)?

• A.FlexFabric
• B.IMC
• C.OpenFlow
• D.OpenStack

Refer to the HP Provision configuration.
ip routing ip route 0.0.0.0/0 10.1.1.1 ip route 0.0.0.0/0 10.1.1.2 ip route 0.0.0.0/0 10.1.1.3 ip route 0.0.0.0/0 10.1.1.4
What is the result of this configuration?

• A.The switch will load share connections for unknown destinations across the four static routes.
• B.The switch only adds the last static route entry to the routing table.
• C.All four routes are added to the routing table, but are never used.
• D.The switch only adds the last two static route entries to the routing table,