Online Access Free HPE0-S60 Practice Test

Which statement about the HPE D3940 storage module is true?

• A.Up to five modules can be installed in a single frame with Gen10 servers
• B.SATA drives requires redundant 10 adapters to be installed in this module
• C.Only one type of drives (SATA, SAS, SSD) can be installed in each module
• D.it is configured through CLl available from HPE Synergy console

Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?

• A.RMC CLI to update I/O and HPE Persistent Memory firmware
• B.HPE OneView IT HPE Persistent Memory firmware must be updated.
• C.HPE SUM if HPE Persistent Memory firmware must be updated
• D.HPE OneView method for I/O firmware update procedure

What is a limitation when creating a server profile?

• A.It is not possible to create shared volumes on demand through a server profile
• B.ILO management is limited to the integration with Active Directory or LDAP
• C.BIOS settings can be changed only when UEFI optimized is selected as boot mode
• D.Administrator cannot define more than 8 connections within a server profile

Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

• A.A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
• B.SAS switches must be moved to second fabric and FC modules Installed in the first one.
• C.For VC-FC modules, all of server facing ports must be property licensed.
• D.For Brocade switches, a logical interconnect group must be created in HPE OneView.

Click the drop-down menu that will allow you to define the location of the master modules within the logical interconnect group.

Correct Answer:

Explanation:
Click the drop-down menu next to"Interconnect bay set".
To define the location of the master modules within the logical interconnect group, you need to select the appropriate interconnect bay set. The drop-down menu next to "Interconnect bay set" allows you to specify which bays the interconnect modules will be placed in, thereby determining the location of the master modules.