Free Access HP.HPE6-A69.v2023-04-06.q21 Practice Test (Page 3)

Question 6

A customer is installing a new ArubaOS-CX switch The customer does not change the factory default QoS configuration The switch receives an 802.1Q tagged VOIP frame on a port The header contains a DSCP value of EF(46) and the frame has an 802 ip value of 5 How will the switch forward the frame?

A.Forwards it based on the 802 ip value in the frame

B.Forwards it based on the DSCP value in the frame

C.Forwards the frame with best effort forwarding

D.The switch trusts the settings and It forwards the frame with the current settings

Question 7

Which statement is true regarding IP-SLA?

A.ArubaOS-CX supports Doth SLA configuration through CU and by agents through the NAE.

B.ArubaOS-CX supports forever tests

C.ArubaOS-CX supports on-demand as well as forever tests.

D.The default and minimum probe interval for voip SLA is 180 seconds

Question 8

A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing.

With the ports set up as routed ports, and default parameters for OSPF, which action is the simplest way to allow the fastest communication...

A.Set the OSPF reference bandwidth to 10 or higher

B.Utilize Equal-cost multi-path routing to aggregate more bandwidth on the WAN.

C.No action is required

D.Set the OSPF cost parameters on every interface on every switch according to the Bandwidth or each link

Question 9

Refer to the exhibit.

Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and
10.102.26.0/24 Which statement is true regarding the routing troubleshooting?

A.Route Distinguisher needs to be set to 1 for default VRF.

B.Route leaking is supported between non-default VRFs only

C.Multi-protocol BGP routing needs to be defined for route leaking

D.Route leaking between default and non-default VRFs is supported with Aruba CX 8400.

Question 10

A customer would like to utilize some ArubaOS-CX 6300M switches to perform OSPF routing.

All ports are routed, and ECMP is enabled, with other default parameters for OSPF. What will be the result of traffic sent from CLIENT-A to CUENT-B?

A.Traffic will be SW3 -> SW-1 -> Sw-2 & SW3 -> SW-4 -> SW-2

B.Traffic will be SW3 -> SW-4 -> SW-2.

C.Traffic will be SW3 -> SW-1 -> sw-4 -> SW-2

D.Traffic win be SW3 -> SW-1 -> sw-2.

Other Version: 392HP.HPE6-A69.v2024-05-19.q21; 715HP.HPE6-A69.v2023-01-30.q22

Latest Upload: 120ACFE.CFE-Fraud-Prevention-and-Deterrence.v2025-11-07.q135; 145Tableau.TDA-C01.v2025-11-06.q151; 130CompTIA.220-1202.v2025-11-05.q59; 123Supermicro.SDLCSA.v2025-11-05.q13; 142BICSI.INSTC_V8.v2025-11-05.q60; 120SAP.C_HRHPC_2505.v2025-11-04.q27; 203Oracle.1z0-809.v2025-11-03.q126; 283Citrix.1Y0-241.v2025-11-01.q94; 227IFSEInstitute.CIFC.v2025-11-01.q102; 146APA.CPP-Remote.v2025-11-01.q92

Question 6

Question 7

Question 8

Question 9

Question 10

Download PDF File