A frame is the data link layer PDU that encapsulates the network layer PDU (packet) with a header and a trailer that contain information such as source and destination MAC addresses, frame type, error detection, etc. A frame is transmitted over a physical medium such asEthernet, Wi-Fi, etc.

For configuring wireless access for multiple classes of IoT devices with varying security requirements, using a single SSID with Multiple Pre-Shared Keys (MPSK) is an efficient solution. MPSK allows different devices or groups of devices to connect to the same SSID but with unique PSKs, facilitating unique security policies for each class. Given that some IoT devices only support 802.11b, which operates in the 2.4GHz band, it is essential to include the 2.4GHz band in the configuration. The 5GHz band should also be included to support devices capable of operating in that band and to optimize network performance. The 6GHz band (option A) is not suitable since 802.11b devices are not compatible with it. Individual SSIDs for each IoT class (options C and D) would unnecessarily complicate network management and SSID overhead.

These commands might help troubleshoot this issue as they check various aspects of the connectivity between the edge switch and the core switch, such as Layer 3 reachability, Layer 2 adjacency, LACP configuration and status, VLAN trunking configuration, and interface status.

LLDP (Link Layer Discovery Protocol) is commonly used by network devices, including wireless access points, to negotiate PoE (Power over Ethernet) power levels with the switch they are connected to. This allows the access point to communicate its power requirements to ensure it receives the necessary power for optimal operation.

The show lacp command displays the status of LACP participants and member links within a LAG. It allows you to verify that all four 10G interfaces are actively participating in the aggregation and operating correctly, making it the most direct command for checking LACP-LAG health.