Online Access Free HPE7-V01 Practice Test

A customer wants to consolidate compute and storage for a ROBO (remote office/branch office) deployment with limited IT staff on-site. They want built-in backup and deduplication with minimal management overhead. Which HPE solution best fits this requirement?

• A.HPE Apollo systems with Lustre
• B.HPE Alletra 9000 with Primera OS
• C.HPE SimpliVity hyperconverged infrastructure
• D.HPE Synergy with 3PAR StoreServ

When designing a VXLAN/EVPN fabric using Aruba CX switches, what is the primary purpose of the EVPN control plane compared to traditional flood-and-learn VXLAN?

• A.EVPN increases flooding compared to flood-and-learn VXLAN.
• B.EVPN only works with static VLANs and cannot support VXLAN.
• C.EVPN uses BGP to proactively distribute MAC and IP reachability information, reducing flooding compared to flood-and-learn.
• D.EVPN eliminates the need for a routed underlay.

You presented a solution to your customer that will replace their legacy HPE BladeSystem.
The new solution is based on the HPE Synergy platform and consists of the following components:
5 HPE Synergy 12000 frames
2 HPE Virtual Connect SE 100Gb F32 Module for Synergy
8 HPE Synergy 50Gb Interconnect Link Module
60 HPE Synergy 480 Gen11
Which statement describes the business and financial benefits for this new solution on the customer?

• A.Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more expansion slots in the form of mezzanine cards.
• B.HPE Synergy supports master/satellite approach that requires less HPE Virtual Connect modules, and so will be more economical.
• C.Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more interconnect modules which provides better scalability and expansion possibilities.
• D.HPE Synergy needs more HPE Virtual Connect modules because of the increased bandwidth for Gen11 compute nodes.

During a design review for an HPE Aruba CX network, the customer requires Layer 2 multipathing across two core switches without using Spanning Tree Protocol, while presenting a single logical switch to downstream devices. Which Aruba CX technology should you recommend?

• A.LACP standalone bonding
• B.VSX (Virtual Switching Extension)
• C.VRRP
• D.OSPF ECMP

Your customer has a networking environment based on Aruba CX 8325 switches configured with Quality of Service settings that give higher priority to iSCSI traffic between HPE ProLiant servers and HPE Alletra 6000 storage.
They are planning to add HPE Synergy frames with HPE Virtual Connect modules that will connect to the same Aruba infrastructure. The servers will be deployed in different VLANs. They need to update their environment to provide a lossless fabric for RoCE traffic that will traverse between the HPE Synergy frames and through multiple switches.
Your customer has two sets of Synergy frames in different logical enclosures connected with Aruba CX 8325 switches. They want to update their environment to provide a lossless fabric for RoCE traffic.
What is the correct environmental or design change that will meet the customer's new requirement?

• A.The HPE Synergy frames must be connected to different switches for RoCE traffic and Ethernet traffic.
• B.Use RoCEv2 and properly design networking map for the Layer 3 interfaces on the path.
• C.Use RoCEv1 and configure DCBX on the switch facing the CNA in the servers.
• D.The Aruba CX 8325 switches must be changed to Aruba CX 8400 to support Data Center Bridging eXchange (DCBX).