Online Access Free ISS-003 Practice Test

Your customer calls you to say that their dual socket server is reporting only half the memory that they originally purchased, and further that not only does the internal RAID card not show up, but they can't find any of the SAS drives that they purchased. How would you advise your customer?

• A.Ensure that the customer swaps out all the memory, one by one, with known good ones, ensuring that appropriate ESD precautions are observed
• B.Advise the customer to do an RMA on the entire server as it is clearly damaged.
• C.Pay the customer a visit to carry out a physical check on the server.
• D.Check to ensure both CPU sockets are populated.
• E.Advise the customer to do an RMA on the RAID controller and half the memory, as this is clearly the problem
• F.Advise the customer to swapout the RAID controller with a known good one, ensuring that appropriate ESD precautions are observed

During a training event that you are giving as an Intel@ Server Specialist on the use of Intel@ Raid in protecting customer data from critical loss, you explain how a RAID array can generate alerts through an audible alarm. You arethen asked the question what it means when the Raid controller is beeping. How would you answer this question from the following list? (Select ALL that apply)

• A.An unsupportedbackplane has been detected
• B.The Adapter cannot detect the motherboard
• C.The Adapter cannot detect the backplane
• D.The Array is degraded
• E.Battery failure
• F.The incorrect driver is installed

Which of the following is a function of the BIOS Recovery Boot feature?

• A.BIOS recovery boot is the recommended approach to reset any BIOS passwords.
• B.BIOS recovery boot can be used to recover the BIOS settings from the last known good configuration of the system.
• C.BIOS recovery boot is always used as part of the BIOS update process.
• D.BIOS recovery boot can be used to apply a BIOS version to a system that has a corrupt BIOS.

Your customer calls with an error message they noticed while making some changes in the BIOS setup screen; stating that the "SEL is full." What does this mean and how would you advise your customer to correct this error from the list below?

• A.They should install an additional flash drive for the SEL
• B.They should enable the option "Clear SEL" in BIOS
• C.They should clear the SEL using SELclear utility
• D.They should enable the option "Clear the SPI flash memory."
• E.They should clearthe SEL using SELViewer

The system halts during post at a blank screen with the text "Unrecoverable fatal error found. System will not boot until the error is resolved." Which of the following is considered as a fatal POST error?

• A.PCI out of resource error.
• B.Processor family mismatch detected.
• C.CMOS checksum error.
• D.Singledrive failure in a RAID 1 set.