Online Access Free JN0-100 Practice Test

Referring to the exhibit, you want to block HTTP access to Web-Server from the subnet where Mal-User is located. All other traffic should be permitted.
Which firewall filter configuration do you use?

• A.[edit firewall family inet filter STOP-MAL-USER]
  user@router# show
  term one {
  from {
  source-address {
  100.100.100.0/24;
  }
  destination-address {
  200.200.200.1/32;
  }
  protocol tcp;
  destination-port http;
  }
  then reject;
  }
  term two {
  then {
  accept;
  }
  }
• B.[edit firewall family inet filter STOP-MAL-USER]
  user@router# show
  term one {
  from {
  source-address {
  200.200.200.0/24;
  }
  destination-address {
  100.100.100.10/32;
  }
  protocol tcp;
  destination-port http;
  }
  then reject;
  }
  term two {
  then {
  accept;
  }
  }
• C.[edit firewall family inet filter STOP-MAL-USER]
  user@router# show
  term one {
  from {
  source-address {
  200.200.200.0/24;
  }
  destination-address {
  100.100.100.10/32;
  }
  protocol tcp;
  destination-port http;
  }
  then accept;
  }
  term two {
  then {
  reject;
  }
  }
• D.[edit firewall family inet filter STOP-MAL-USER]
  user@router# show
  term one {
  from {
  source-address {
  100.100.100.0/24;
  }
  destination-address {
  200.200.200.1/32;
  }
  protocol tcp;
  destination-port http;
  }
  then accept;
  }
  term two {
  then {
  reject;
  }
  }

-- Exhibit -
[edit class-of-service]
user@router# show
interfaces {
ge-0/0/2 {
unit 0 {
classifiers {
inet-precedence default;
}
}
}
}
-- Exhibit --
Referring to the exhibit, which type of classifier is being used in this CoS configuration?

• A.multifield
• B.policer
• C.behavior aggregate
• D.forwarding policy

Which account is used to access a Junos device in factory-default configuration?

• A.admin
• B.juniper
• C.user
• D.root

You have been asked to configure your MX240 with a default route toward your upstream ISP at IP address 192.168.100.1.
Which command successfully completes this task?

• A.user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.100.1
• B.user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.100.1
• C.user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.100.1
• D.user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.100.1

You have been assigned the 66.96.130.0/24 network and need to segment it into at least 60 subnets.
Which network mask meets this requirement?

• A./29
• B./27
• C./28
• D./30