If you've committed a configuration and then need to revert to the previous configuration, therollback command is used. Since the incorrect IP address has not been committed, as indicated by thecommit check command being successful, issuingrollback 1will undo the changes made in the current session, which includes the accidental entry of the IP address.

In Junos OS, issuing the rollback 0 command reverts the candidate configuration to the last committed configuration. If you have made changes to some interfaces but have not committed those changes, using rollback 0 will discard these uncommitted changes, reverting to the state of the configuration at the time of the last commit. This command does not affect system files like messages.log, reboot the device, or load the factory default configuration; it simply undoes uncommitted changes.

To convert the decimal number 7 to binary, the correct representation is 00000111 (C). In binary, 7 is represented as 1+2+4 (2^0 + 2^1 + 2^2), which corresponds to the last three digits being 1 in the binary format, with leading zeros added for clarity.

The forwarding table in a network device requires specific information to efficiently forward traffic toward its destination. This includes the next hop IP address, which indicates the next router or device in the path to the destination. The outgoing interface name identifies the physical or logical interface through which the packet should be sent to reach the next hop. Lastly, the next hop MAC address is crucial for Layer 2 forwarding decisions, allowing the device to encapsulate the IP packet in a frame that can be understood by Ethernet or other Layer 2 protocols. OSPF metric values and BGP local preference values are used in the routing decision process to select the best path and populate the forwarding table but are not directly used by the forwarding table to forward traffic.

Junos OS supports only 1 rescue configuration file on a device. This rescue configuration is a safeguard feature that allows network administrators to revert to a known good configuration in case of a configuration error or issue, ensuring network stability.
In Junos OS, each device supports only one rescue configuration file. The rescue configuration is a specific configuration that can be saved and later retrieved if needed. This is used as a fallback configuration that you know works and can be applied in case of an emergency or if the current configuration has issues.
Reference:
"You can create a rescue configuration file by using the request system configuration rescue save operational mode command. Each Junos OS device can have only one rescue configuration file."