Online Access Free JN0-201 Practice Test

By default, which command can be used to display information about packets that have been logged with the syslog firewall filter action?

• A.show firewall
• B.show log
• C.show firewall log
• D.show log messages

A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect? (Chose three.)

• A.inbound traffic transiting the router
• B.outbound traffic transiting the router
• C.traffic destined to the interface address on which the filter is applied
• D.traffic destined to the Routing Engine

Given the following configuration: interfaces { so-0/0/0 { unit 0 { family inet { address
10.10.10.1/24; } } } so-0/0/1 { unit 0 { family inet { address 20.20.20.1/24; } } } lo0 { unit
0 { family inet { address 192.168.1.1/32; } } } Which is considered an exception packet?

• A.ICMP traceroute packet with TTL set to 5
• B.IP packet addressed to 10.100.100.10
• C.ICMP echo request addressed to 172.16.1.1
• D.IP packet with the Router Alert option set

What command is issued to verify IS-IS is configured on an interface?

• A.show isis interface
• B.show isis neighbor
• C.show interface route
• D.show interface protocols

Which three BGP states follow the successful completion of the underlying TCP connectivity? (Choose three.)

• A.Open Confirm
• B.Idle
• C.Established
• D.Open Sent
• E.Connect