Question 61
A firewall administrator is implementing a rule that directs HTTP traffic to an internal server listening on a non-standard socket. Which of the following types of rules is the administrator implementing?
Question 62
Multiple users are reporting that they are unable to access the network. The ENTIRE network is shown in the diagram. PCs are not statically assigned IP addresses. The following devices will display settings:
WorkstationA
WorkstationB
WorkstationC
WorkstationD
WorkstationE
WorkstationF
WorkstationG
Laptop1
Laptop2
DHCP server1
DHCP server2
Review the settings and select the box in the diagram that identifies the device causing the issue.
Only one device can be selected at a time.
After checking the device that is causing the issue, select the second tab in the lower left hand corner. Identify the reason as to why some users are unable to access the network.
Instructions:
When the simulation is complete, select the Done button to submit.
After checking the device that is causing the issue, select the second tab in the lower left hand corner. Identify the reason as to why some users are unable to access the network. When the simulation is complete, select the Done button to submit.
Part 2 - Identify the reason as to why some users are unable to access the network.
Workstation(s) are plugged into switch ports configured with half duplex.
The site-to-site router was configured with the incorrect ACL.
DHCP server scope is full and is not providing IP addresses.
WAN and LAN ports are reversed on the router.
STP had disabled some of the ports on the switch.
The NIC driver is not installed.
A wireless client is unable to associate to the AP.
WorkstationA
WorkstationB
WorkstationC
WorkstationD
WorkstationE
WorkstationF
WorkstationG
Laptop1
Laptop2
DHCP server1
DHCP server2
Review the settings and select the box in the diagram that identifies the device causing the issue.
Only one device can be selected at a time.
After checking the device that is causing the issue, select the second tab in the lower left hand corner. Identify the reason as to why some users are unable to access the network.
Instructions:
When the simulation is complete, select the Done button to submit.
After checking the device that is causing the issue, select the second tab in the lower left hand corner. Identify the reason as to why some users are unable to access the network. When the simulation is complete, select the Done button to submit.
Part 2 - Identify the reason as to why some users are unable to access the network.
Workstation(s) are plugged into switch ports configured with half duplex.
The site-to-site router was configured with the incorrect ACL.
DHCP server scope is full and is not providing IP addresses.
WAN and LAN ports are reversed on the router.
STP had disabled some of the ports on the switch.
The NIC driver is not installed.
A wireless client is unable to associate to the AP.
Question 63
The software in a virtualized environment that controls resource allocation and allows multiple operating system guests to run on the same physical platform is known as the:
Question 64
A new building needs to be joined to an existing network, but management has decided that running fiber
is too expensive. Since the buildings are about 1000ft (305m) apart, the IT department has been asked to
propose alternatives. Which of the following is the BEST device to add to each building to facilitate the
extension of the network while meeting budgetary demands?
is too expensive. Since the buildings are about 1000ft (305m) apart, the IT department has been asked to
propose alternatives. Which of the following is the BEST device to add to each building to facilitate the
extension of the network while meeting budgetary demands?
Question 65
A technician is required to install a new DOCSIS-based Internet connection. Which of the following medium types does this use?