OSPF stands for Open Shortest Path First and is a link-state routing protocol that uses Dijkstra's algorithm to calculate the lowest cost between routers. OSPF assigns a cost value to each link based on factors such as bandwidth, delay, or reliability, and builds a map of the network topology. OSPF then uses Dijkstra's algorithm to find the shortest path from each router to every other router in the network1. RIP stands for Routing Information Protocol and is a distance-vector routing protocol that uses hop count as the metric to find the best path. BGP stands for Border Gateway Protocol and is a path-vector routing protocol that uses attributes such as AS path, local preference, or origin to select the best route. EIGRP stands for Enhanced Interior Gateway Routing Protocol and is a hybrid routing protocol that uses a composite metric based on bandwidth, delay, load, and reliability.

- the microwave was already removed from the office
- the signal is OK now
- Notice that the question mentions "numerous cubicles and wooden walls" - meaning the signal now won't have the interference as before
- KEY POINT: the admin wants to "maximize the range of the signal:"
Manually change the frequency to 2.4 GHz for more reliable speeds and range. While 5 GHz gives you a stronger signal, it doesn't travel through walls or ceilings as well, so it doesn't give you the best range.
"Microwave ovens: Older microwave ovens, which might not have sufficient shielding, can emit relatively high-powered signals in the 2.4GHz band, resulting in significant interference with WLAN devices operating in the 2.4GHz band."

Consistent labeling would be the concept that would best help the technician to confirm which switchport corresponds to the wall jack the PC is using. Consistent labeling is a practice of using standardized and descriptive labels for network devices, ports, cables, jacks, and other components. It can help with identifying, locating, and troubleshooting network issues. For example, a technician can use consistent labeling to trace a cable from a PC to a wall jack, and then from a patch panel to a switchport. Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DC_Infra2_5/DCInfra_6.html

802.11ax is the latest WiFi standard that improves WiFi performance in densely populated environments and supports both 2.4 GHz and 5 GHz bands. 802.11ac is the previous standard that only supports 5 GHz band. 802.11g and 802.11n are older standards that support 2.4 GHz band only or both bands respectively. Reference: https://partners.comptia.org/docs/default-source/resources/comptia-network-n10-008-exam-objectives-(2-0), https://www.techtarget.com/searchnetworking/tip/Whats-the-difference-between-80211ax-vs-80211ac