Explanation
For a new global ISP to connect from central offices in North America to the United Kingdom, the best cabling solution would be single-mode fiber optic cable. Single-mode fiber optic cable is a type of cable that is used to transmit data over long distances using light signals. It is typically used in long-haul communication networks, such as those that connect different countries or continents.

Reverse Address Resolution Protocol (RARP) is a protocol that allows a device to obtain its MAC address from its IP address. A MAC spoofing attack is an attack where a device pretends to have a different MAC address than its actual one. RARP can be used to detect a MAC spoofing attack by comparing the MAC address obtained from RARP with the MAC address obtained from other sources, such as ARP or DHCP.
References:
https://partners.comptia.org/docs/default-source/resources/comptia-network-n10-008-exam-objectives-(2-0),
https://www.techopedia.com/definition/25597/reverse-address-resolution-protocol-rarp

CNAME stands for Canonical Name, and it is a type of DNS record that creates an alias for another domain name. A CNAME record can be used to redirect a network resource that has been moved to a different location, such as a SaaS solution. For example, if a web server that was previously hosted on the local network with the domain name www.example.com is now hosted by a SaaS provider with the domain name www.saasprovider.com, a CNAME record can be created to point www.example.com to www.saasprovider.com. This way, the users can still access the web server using the original domain name, and the DNS server will resolve it to the new domain name.
References
* CNAME is one of the common DNS record types covered in Objective 1.6 of the CompTIA Network+ N10-008 certification exam1.
* CNAME can be used to redirect a network resource that has been moved to a different location23.
* CNAME creates an alias for another domain name23.
1: CompTIA Network+ Certification Exam Objectives, page 4 2: DNS Record Types - N10-008 CompTIA Network+ : 1.6 3: The Official CompTIA Network+ Student Guide (Exam N10-008), Chapter 1, page 32

Explanation
- the microwave was already removed from the office
- the signal is OK now
- Notice that the question mentions "numerous cubicles and wooden walls" - meaning the signal now won't have the interference as before
- KEY POINT: the admin wants to "maximize the range of the signal:"
Manually change the frequency to 2.4 GHz for more reliable speeds and range. While 5 GHz gives you a stronger signal, it doesn't travel through walls or ceilings as well, so it doesn't give you the best range.
"Microwave ovens: Older microwave ovens, which might not have sufficient shielding, can emit relatively high-powered signals in the 2.4GHz band, resulting in significant interference with WLAN devices operating in the 2.4GHz band."