Coaxial cable is a type of cable that consists of a central copper conductor surrounded by an insulating layer and a braided metal shield. Coaxial cable is commonly used to connect a cable modem to an ISP by transmitting data over cable television networks. Coaxial cable can support high bandwidth and long distances with minimal interference or attenuation. References:
https://partners.comptia.org/docs/default-source/resources/comptia-network-n10-008-exam-objectives-(2-0),
https://www.techopedia.com/definition/4027/coaxial-cable

Mike Meyers
"Internet Small Computer Systems Interface (iSCSI) is built on top of TCP/IP, enabling devices that use the SCSI protocol to communicate across existing networks using cheap, readily available hardware." Jason Dion
"iSCSI (IP Small Computer System Interface)
- Lower cost, built using Ethernet switches (<10 Gbps)
- Relies on configuration allowing jumbo frames over the network"

Explanation
The subnet mask is a binary value that defines how many bits of an IP address are used to identify the network and how many bits are used to identify the host. The subnet mask also determines the size and number of subnets in a network. The ipconfig command shows the current IP configuration of a device, including the subnet mask. In this case, the subnet mask is misconfigured because it does not match the network address of the device. The device has an IP address of 192.168.1.55, which belongs to the network 192.168.1.0/24 (with a subnet mask of 255.255.255.0). However, the subnet mask is set to 225.225.225.224, which is an invalid value that does not correspond to any network prefix length. This causes the device to be unable to communicate with other devices on the same network or access the default gateway. References: CompTIA Network+ N10-008 Certification Study Guide, page 109; The Official CompTIA Network+ Student Guide (Exam N10-008), page 5-4.