Port Address Translation (PAT) allows multiple internal hosts to share a single external IP address by using unique source port numbers for each session, enabling all employees to access external networks through one IP.

Fiber connections require Tx on one end to connect to Rx on the other end. If the patch cord is replaced and link lights remain off, the most common cause is that the connectors are reversed. Swapping (transposing) the connectors ensures proper transmit/receive alignment.
A . Replacing the transceiver may eventually be necessary, but only after verifying correct connections.
B . Restarting the switchport won't resolve a physical misconnection.
D . Using multimode fiber would be incorrect here, as the link was designed for single-mode (10 miles/16 km requires SMF).
Reference (CompTIA Network+ N10-009):

For a web server that requires all connections to be encrypted, port 80 (HTTP) should be disabled. Port 80 is used for unencrypted web traffic, whereas port 443 is used for HTTPS, which provides encrypted communication.
Port 80 (HTTP): This port is used for unsecured web traffic. Disabling this port ensures that all web traffic must use HTTPS, which encrypts the data in transit.
Port 443 (HTTPS): This port is used for secure web traffic via SSL/TLS encryption. Keeping this port open ensures that secure connections can be made to the web server.
Other Ports:
Port 22: Used for SSH, providing secure remote access and file transfers.
Port 587: Used for secure email submission (SMTP) with encryption.
Network References:
CompTIA Network+ N10-007 Official Certification Guide: Discusses the roles and security implications of various ports and protocols.
Cisco Networking Academy: Provides training on secure web server configuration and port management.
Network+ Certification All-in-One Exam Guide: Covers port security and best practices for securing web servers.

Understanding ACLs:
Access Control Lists (ACLs): A set of rules used to control network traffic and restrict access to network resources by filtering packets based on IP addresses, protocols, or ports.
Implementing Security Zones:
Defining Zones: ACLs can be used to create security zones by applying specific rules to different departments, ensuring that only authorized traffic is allowed between these zones.
Control Traffic: ACLs control inbound and outbound traffic at network boundaries, enforcing security policies and preventing unauthorized access.