The correct answer is OSPF (Open Shortest Path First). OSPF is a link-state routing protocol known for its fast convergence and use of the Dijkstra algorithm to calculate the shortest loop-free path. It efficiently scales to large enterprise networks and avoids routing loops by maintaining a complete topology map.
A . BGP is primarily an external routing protocol used between ISPs, not internal.
B . STP is not a routing protocol; it prevents loops at Layer 2.
D . RIP is an older distance-vector protocol with slower convergence and a maximum hop limit of 15.
OSPF's design makes it the preferred internal gateway protocol (IGP) for medium-to-large organizations requiring speed and loop-free reliability.

SNMPv3 is the version of the Simple Network Management Protocol that introduces security enhancements, including message integrity, authentication, and encryption. Unlike previous versions (v1 and v2c), SNMPv3 supports encrypted communication, ensuring that data is not transmitted in plaintext. This provides confidentiality and protects against eavesdropping and unauthorized access.
Reference: CompTIA Network+ study materials.

Branchingallows developers and administrators tocreate an isolated copyof the main configuration so they can test changes independently. This avoids impacting the primary environment and allows for safer testing and development.
Reference:Section 3.5 - Network Access and Management Methods - "Source Control: Branching"

The correct answer is D. DHCP reservation. In a network environment, printers are typically configured to use a consistent IP address so that client devices can reliably locate them. After a power outage, network devices such as printers may reboot and request a new IP address from the DHCP server. If the printer was previously assigned a dynamic IP address, it may now receive a different address, causing users' systems to lose connectivity because they are still trying to print to the old IP.
A DHCP reservation ensures that a specific device (identified by its MAC address) always receives the same IP address from the DHCP server. This combines the convenience of DHCP with the stability of static addressing, which is ideal for shared resources like printers.
The other options are incorrect for this scenario. DoH (DNS over HTTPS) secures DNS queries and is unrelated to IP address assignment. SLAAC (Stateless Address Autoconfiguration) is used for IPv6, not IPv4 environments. APIPA (Automatic Private IP Addressing) assigns a link-local address when DHCP fails, but it does not provide consistent or routable addressing suitable for shared printers.
Therefore, configuring a DHCP reservation ensures consistent network access to the printer after power disruptions.

See the Explanation for detailed information on this simulation.
Explanation:
(Note: Ips will be change on each simulation task, so we have given example answer for the understanding) To troubleshoot all the network components and review the cable test results, you can use the following steps:
* Click on each device and cable to open its information window.
* Review the information and identify any problems or errors that may affect the network connectivity or
* performance.
* Diagnose the appropriate component(s) by identifying any components with a problem and recommend a solution to correct each problem.
* Fill in the remediation form using the drop-down menus provided.
Here is an example of how to fill in the remediation form for PC1:
* The component with a problem is PC1.
* The problem is Incorrect IP address.
* The solution is Change the IP address to 192.168.1.10.
You can use the same steps to fill in the remediation form for other components.
To enter commands in each device, you can use the following steps:
* Click on the device to open its terminal window.
* Enter the command ipconfig /all to display the IP configuration of the device, including its IP address, subnet mask, default gateway, and DNS servers.
* Enter the command ping <IP address> to test the connectivity and reachability to another device on the network by sending and receiving echo packets. Replace <IP address> with the IP address of the destination device, such as 192.168.1.1 for Core Switch 1.
* Enter the command tracert <IP address> to trace the route and measure the latency of packets from the device to another device on the network by sending and receiving packets with increasing TTL values.
Replace <IP address> with the IP address of the destination device, such as 192.168.1.1 for Core Switch
1.
Here is an example of how to enter commands in PC1:
* Click on PC1 to open its terminal window.
* Enter the command ipconfig /all to display the IP configuration of PC1. You should see that PC1 has an incorrect IP address of 192.168.2.10, which belongs to VLAN 2 instead of VLAN 1.
* Enter the command ping 192.168.1.1 to test the connectivity to Core Switch 1. You should see that PC1 is unable to ping Core Switch 1 because they are on different subnets.
* Enter the command tracert 192.168.1.1 to trace the route to Core Switch 1. You should see that PC1 is unable to reach Core Switch 1 because there is no route between them.
You can use the same steps to enter commands in other devices, such as PC3, PC4, PC5, and Server 1.