Online Access Free NACE-CIP2-001 Practice Test

You are the NACE Level 2 Inspector on a project where overcoating of galvanized steel is being performed. The specification references SSPC SP 16 as the surface preparation method. At the pre-job meeting operations personnel make it clear that abrasive blasting will not permitted. The Owner's representative asks you what other methods might be used.
Of the options shown below, what would be the preferred option in this situation?

• A.SP 1 followed by acid etching
• B.SP 1 followed by caustic etching
• C.SP 1 followed by SP 2
• D.SP 1 followed by SP 3

A failure caused by applying a coating too thinly is known as

• A.cracking.
• B.chalking.
• C.pinholes.
• D.failure to cure.

You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:

• A.Review the NACE Attestation prior to making a decision
• B.Accept assignment without hesitation
• C.Meet with the prospective employer to scope of your role
• D.Advise the prospective employer that you cannot accept the position

The Concrete Repair Institute's comparators can be used to assess:

• A.Surface cleanliness prior to coating
• B.Surface profile prior to coating
• C.Contamination levels prior to coating
• D.Compressive and tensile strength prior to coating

Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires

• A.25 double rubs with a saturated cloth.
• B.35 single rubs with a saturated cloth.
• C.25 single rubs with a saturated cloth.
• D.50 double rubs with a saturated cloth.