Free Access NACE.NACE-CIP2-001.v2023-10-18.q33 Practice Test (Page 4)

The HATE adhesion tester uses

A.a special tape to apply pressure to the test dolly.

B.a hydraulic piston to apply pressure to the test dolly.

C.compressed air to apply pressure to the test dolly.

D.mechanical means only to apply pressure to the test dolly.

When NACE/SSPC WJ 1 is referenced; what type of equipment would the Inspector expect to see on the job:

A.Scarifiers

B.Power Tools

C.Water Jetting Equipment

D.Abrasive Blasting Equipment

When using a destructive Paint Inspection Gauge the NACE inspector must:

A.Consult SSPC Guide 1 prior to use

B.Select the appropriate hand wheel based on the measured Dry Film Thickness prior to us

C.Determine the Dry Film Thickness of the coating prior to use

D.Ensure the glue on the dolly is properly applied prior to use

In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?

A.Cure stage

B.Flow stage

C.Wetting stage

D.Gel stage

Which surface preparation method uses a dilute acid solution to remove laitance and I roughen the concrete surface?

A.Acid etching

B.Stoning

C.High-pressure water washing

D.Sacking

Other Version: 300NACE.NACE-CIP2-001.v2026-04-07.q36; 773NACE.NACE-CIP2-001.v2025-07-28.q33; 1037NACE.NACE-CIP2-001.v2024-12-18.q36; 1050NACE.NACE-CIP2-001.v2024-03-28.q35; 1631NACE.NACE-CIP2-001.v2022-10-22.q36; 1524NACE.NACE-CIP2-001.v2022-06-20.q33; 1947NACE.NACE-CIP2-001.v2022-02-07.q34; 102NACE.Prepawaypdf.NACE-CIP2-001.v2022-01-27.by.nicole.33q.pdf

Latest Upload: 200PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 293Nokia.4A0-113.v2026-05-01.q69; 252EC-COUNCIL.312-49v11.v2026-04-30.q214; 227Microsoft.MB-820.v2026-04-30.q101; 207Salesforce.MC-202.v2026-04-30.q57; 204BICSI.INSTC_V8.v2026-04-29.q53; 332NMLS.MLO.v2026-04-28.q82; 241NCARB.Project-Management.v2026-04-28.q27; 457EMC.D-AV-DY-23.v2026-04-27.q184; 1110ServiceNow.CSA.v2026-04-27.q483

Download PDF File