Free Access Nutanix.NCS-Core.v2026-01-19.q207 Practice Test (Page 21)

Question 96

Refer to the exhibit.

An administrator logs in to Prism and sees the status shown in the exhibit within the Hardware Diagram section.
What should the administrator do?

A.Restart all CVMs for the cluster to check, confirm health and repartition and add the disks.

B.Check status of applications running onthe cluster and call support

C.Reseat all disks immediately. If this does not help, reseat the nodes.

D.Resolve all alerts and re-import the disks to make sure there is no service disruption.

Question 97

A consultant needs to review a customer's switch port configuration to identify any issues. Other customer requirements are as follows:
* Leverage LACP
* Native VLAN will not be used
* Use Multiple Upstream switches
* Use VLANs 20-25 and 30
* LACP Fallback has been Enabled
* vPC or MLAG has been configured
What must be included in a configuration in order to meet these requirements?

A.Native VLAN set to 30
Ports in access mode to allow all necessary VLANs

B.Native VLAN set to 30
Ports Trunked to allow all necessary VLANs

C.Native VLAN set to default
Ports in access mode to allow all necessary VLANs

D.Native VLAN set to default
Ports trucked to allow all necessary VLANs

Question 98

In which part of the Knowledge Transfer can the customer learn how to create, escalate, comment, and close cases?

A.Operations Guide

B.Demonstration of the Support Portal

C.Demonstration of features

D.Handover Slides and Checklist

Question 99

An administrator is supporting a business critical environment and deploys metro availability to achieve a zero data loss configuration. The two clusters are connected by a 1GbE connection. A new workload is going to be deployed to this cluster. This workload requires a sustained 150MB/S of write throughput and 20MB/s of read throughput.
Which change must be made to deploy the workload successfully on this cluster?

A.The bandwidth must be increased to support this workload.

B.The workload must be configured to read at greater than 12.5MB/S.

C.The replication frequency must be less than 60 minutes.

D.Zero data loss nearsync must be used to support this workload.

Question 100

Refer to the exhibits.

A consultant is trying to test port failover on the node shown in the first exhibit. A continuous ping test is performed to the host. The consultant shuts down one of the links, after which the host ping request times out.
The consultant tries to troubleshoot the issue with the customer and sees the information shown in the second exhibit on their Cisco Switches:

What is causing the issue?

A.There is a Native VLAN mismatch on the switchport.

B.The wrong VLAN is tagged on the host.

C.Bad SPF+ cables are on the active interface.

D.PortFast is not enabled on the port connected to the host.

Other Version: 2106Nutanix.NCS-Core.v2025-09-15.q133; 2721Nutanix.NCS-Core.v2025-04-23.q117; 3909Nutanix.NCS-Core.v2025-01-22.q156; 2850Nutanix.NCS-Core.v2024-09-11.q146; 1663Nutanix.NCS-Core.v2024-05-15.q67; 4775Nutanix.NCS-Core.v2023-05-06.q69; 3496Nutanix.NCS-Core.v2022-11-11.q64; 3162Nutanix.NCS-Core.v2022-08-13.q67; 7815Nutanix.NCS-Core.v2022-02-14.q63; 80Nutanix.Braindumpspass.NCS-Core.v2021-10-05.by.clare.67q.pdf

Latest Upload: 176PaloAltoNetworks.SSE-Engineer.v2026-10-17.q44; 358Cisco.300-420.v2026-10-17.q324; 206Salesforce.MCE-Con-201.v2026-10-15.q108; 192EMC.NCA.v2026-10-15.q25; 291Apple.Apple-Device-Support.v2026-10-15.q159; 201F5.F5CAB3.v2026-10-14.q47; 192Oracle.1Z0-1048-25.v2026-10-14.q67; 271Cisco.300-730.v2026-10-14.q199; 263Salesforce.Sales-Admn-202.v2026-10-14.q160; 179ServSafe.ServSafe-Manager.v2026-10-13.q32

Question 96

Question 97

Question 98

Question 99

Question 100

Download PDF File