Free Access Google.Professional-Cloud-Network-Engineer.v2025-05-14.q111 Practice Test (Page 5)

Question 16

You have created an HTTP(S) load balanced service. You need to verify that your backend instances are responding properly.
How should you configure the health check?

A.Set request-path to a specific URL used for health checking, and set proxy-header to PROXY_V1.

B.Set request-path to a specific URL used for health checking, and set host to include a custom host header that identifies the health check.

C.Set request-path to a specific URL used for health checking, and set response to a string that the backend service will always return in the response body.

D.Set proxy-header to the default value, and set host to include a custom host header that identifies the health check.

Question 17

You are designing a hybrid cloud environment. Your Google Cloud environment is interconnected with your on-premises network using HA VPN and Cloud Router in a central transit hub VPC. The Cloud Router is configured with the default settings. Your on-premises DNS server is located at 192.168.20.88. You need to ensure that your Compute Engine resources in multiple spoke VPCs can resolve on-premises private hostnames using the domain corp.altostrat.com while also resolving Google Cloud hostnames. You want to follow Google-recommended practices. What should you do?

A.Create a private forwarding zone in Cloud DNS for 'corp.altostrat.com' called corp-altostrat-com that points to 192.168.20.88. Associate the zone with the hub VPC.
Create a private peering zone in Cloud DNS for 'corp.altostrat.com' called corp-altostrat-com associated with the spoke VPCs, with the hub VPC as the target.
Set a custom route advertisement on the Cloud Router for 35.199.192.0/19.
Configure VPC peering in the spoke VPCs to peer with the hub VPC.

B.Create a private forwarding zone in Cloud DNS for 'corp altostrat.com' called corp-altostrat-com that points to 192. 168.20.88. Associate the zone with the hub VPC.
Create a private peering zone in Cloud DNS for 'corp.altostrat.com' called corp-altostrat-com associated with the spoke VPCs, with the hub VPC as the target.
Sat a custom route advertisement on the Cloud Router for 35.199.192.0/19.
Create a hub and spoke VPN deployment in each spoke VPC to connect back to the hub VPC.

C.Create a private forwarding zone in Cloud DNS for 'corp.altostrat.com' called corp-altostrat-com that points to 192.168.20.88.
Associate the zone with the hub VPC. Create a private peering zone in Cloud DNS for 'corp.altostrat.com' called corp-altostrat-com associated with the spoke PCs, with the hub VPC as the target.
Set a custom route advertisement on the Cloud Router for 35.199.192.0/19.

D.Create a private forwarding zone in Cloud DNS for 'corp.altostrat.com' called corp-altostrat-com that points to 192.168.20.88. Associate the zone with the hub VPC.
Create a private peering zone in Cloud DNS for 'corp.altostrat.com' called corp-altostrat-com associated with the spoke VPCs, with the hub VPC as the target.
Set a custom route advertisement on the Cloud Router for 35.199.192.0/19.
Create a hub-and-spoke VPN deployment in each spoke VPC to connect back to the on-premises network directly.

Question 18

You are designing a hub-and-spoke network architecture for your company's cloud-based environment. You need to make sure that all spokes are peered with the hub. The spokes must use the hub's virtual appliance for internet access.
The virtual appliance is configured in high-availability mode with two instances using an internal load balancer with IP address 10.0.0.5. What should you do?

A.Create two default routes in the hub VPC that point to the next hop instances of the virtual appliances.
Delete the default internet gateway route in the hub VPC, and create a new higher-priority route that is tagged only to the appliances with a next hop of the default internet gateway.
Export the custom routes in the hub. Import the custom routes in the spokes.

B.Create a default route in the hub VPC that points to IP address 10.0.0.5.
Delete the default internet gateway route in the hub VPC, and create a new higher-priority route that is tagged only to the appliances with a next hop of the default internet gateway.
Export the custom routes in the hub. Import the custom routes in the spokes.
Delete the default internet gateway route of the spokes.

C.Create a default route in the hub VPC that points to IP address 10.0.0.5.
Delete the default internet gateway route in the hub VPC, and create a new higher-priority route that is tagged only to the appliances with a next hop of the default internet gateway.
Create a new route in the spoke VPC that points to IP address 10.0.0.5.

D.Create a default route in the hub VPC that points to IP address 10.0.0.5.
Delete the default internet gateway route in the hub VPC, and create a new higher-priority route that is tagged only to the appliances with a next hop of the default internet gateway.
Export the custom routes in the hub.
Import the custom routes in the spokes.

Question 19

You have the networking configuration shown in the diagram. A pair of redundant Dedicated Interconnect connections (int-Igal and int-Iga2) terminate on the same Cloud Router. The Interconnect connections terminate on two separate on-premises routers. You are advertising the same prefixes from the Border Gateway Protocol (BGP) sessions associated with the Dedicated Interconnect connections. You need to configure one connection as Active for both ingress and egress traffic. If the active Interconnect connection fails, you want the passive Interconnect connection to automatically begin routing all traffic Which two actions should you take to meet this requirement? (Choose Two)

A.Configure the advertised route priority > 10,200 on the active Interconnect connection.

B.Advertise a lower MED on the passive Interconnect connection from the on-premises router

C.Configure the advertised route priority as 200 for the BGP session associated with the active Interconnect connection.

D.Configure the advertised route priority as 200 for the BGP session associated with the passive Interconnect connection.

E.Advertise a lower MED on the active Interconnect connection from the on-premises router

Correct Answer: C,E

This answer meets the requirement of configuring one connection as Active for both ingress and egress traffic, and enabling automatic failover to the passive connection in case of failure. The reason is:
The advertised route priority is a value that Cloud Router uses to set the route priority when advertising routes to your on-premises router. The lower the value, the higher the priority1. By setting the advertised route priority as 200 for the active connection, you ensure that it has a higher priority than the passive connection, which has the default value of 1001. This way, your on-premises router will prefer the routes from the active connection over the passive one for ingress traffic.
The MED (Multi-Exit Discriminator) is a value that your on-premises router uses to indicate its preference for receiving traffic from Cloud Router. The lower the value, the higher the preference2. By advertising a lower MED on the active connection from your on-premises router, you ensure that Cloud Router will prefer sending traffic to the active connection over the passive one for egress traffic.
If the active connection fails, Cloud Router will stop receiving routes from it and will start using the routes from the passive connection for egress traffic. Similarly, your on-premises router will stop receiving routes with priority 200 from the active connection and will start using the routes with priority 100 from the passive connection for ingress traffic. This achieves automatic failover without any manual intervention.
Option A is incorrect because setting the advertised route priority > 10,200 on the active connection would deprioritize it globally in your VPC network, which is not what you want1. Option B is incorrect because advertising a lower MED on the passive connection would make Cloud Router prefer sending traffic to it over the active one, which is not what you want2. Option D is incorrect because setting the advertised route priority as 200 for both connections would make them equally preferred by your on-premises router, which is not what you want1.
Reference:
Update the base route priority | Cloud Router | Google Cloud
Configuring BGP sessions | Cloud Router | Google Cloud

Question 20

You are designing a shared VPC architecture. Your network and security team has strict controls over which routes are exposed between departments. Your Production and Staging departments can communicate with each other, but only via specific networks. You want to follow Google-recommended practices.
How should you design this topology?

A.Create 1 VPC within the shared VPC Host Project, and share individual subnets with the Service Projects to filter access between the specific networks.

B.Create 2 shared VPCs within the shared VPC Host Project, and create a Cloud VPN/Cloud Router between them. Use Flexible Route Advertisement (FRA) to filter access between the specific networks.

C.Create 2 shared VPCs within the shared VPC Host Project, and enable VPC peering between them. Use firewall rules to filter access between the specific networks.

D.Create 2 shared VPCs within the shared VPC Service Project, and create a Cloud VPN/Cloud Router between them. Use Flexible Route Advertisement (FRA) to filter access between the specific networks.

Other Version: 2242Google.Professional-Cloud-Network-Engineer.v2025-09-09.q179; 2018Google.Professional-Cloud-Network-Engineer.v2024-10-28.q109; 2922Google.Professional-Cloud-Network-Engineer.v2023-04-24.q111; 1884Google.Professional-Cloud-Network-Engineer.v2023-01-24.q52; 2958Google.Professional-Cloud-Network-Engineer.v2022-03-12.q83; 102Google.Ipassleader.Professional-Cloud-Network-Engineer.v2021-10-07.by.stephanie.79q.pdf

Latest Upload: 427PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 538Nokia.4A0-113.v2026-05-01.q69; 596EC-COUNCIL.312-49v11.v2026-04-30.q214; 549Microsoft.MB-820.v2026-04-30.q101; 421Salesforce.MC-202.v2026-04-30.q57; 461BICSI.INSTC_V8.v2026-04-29.q53; 572NMLS.MLO.v2026-04-28.q82; 395NCARB.Project-Management.v2026-04-28.q27; 743EMC.D-AV-DY-23.v2026-04-27.q184; 1947ServiceNow.CSA.v2026-04-27.q483

Question 16

Question 17

Question 18

Question 19

Question 20

Download PDF File