Online Access Free RCDD-001 Practice Test

You have been asked to provide a N+1 level of power redundancy in the new equipment room (ER) being
designed with a Tier-II power supply. What should you do?

• A.Provide two separate UPS systems with one serving the entire facility and the second on automatic
  power failure transfer to serve critical circuits only.
• B.Provide two separate UPS units with an automatic power failure transfer to serve entire facility.
• C.Provide a UPS that serves all of the equipment in the facility.
• D.Provide two separate UPS units with each one serving half the equipment in the facility.

You are designing an interactive patient television system (IPTS) that will provide internet, nurse call and
LCD television services. From the following, which medium will NOT support these services in a
backbone cabling system?

• A.Balanced twisted pair
• B.RG-11 coaxial cable
• C.Multimode optical fiber cable
• D.Coaxial 1/2 inch hard-line cable

A furniture cluster with 26 requires a MINIMUM of how many multiuser telecommunications outlet
assembly (MUTOA)?

• A.3
• B.2
• C.4
• D.1
• E.5

Which active DAS component is responsible for coupling input signals from donor systems?

• A.Transceiver
• B.Receiver
• C.Coupling antenna
• D.Bidirectional amplifier

You have determined that the equipment room (ER) you are designing will be the minimum size of 15 sq
m (160 sq ft) and is servicing 80 but architectural changes will add 175 , which will require you to add a
horizontal cross-connect (HC). What size should the equipment room (ER) be?

• A.23 sq m (250 sq ft)
• B.18 sq m (193 sq ft)
• C.37 sq m (400 sq ft)
• D.47 sq m (500 sq ft)
• E.31 sq m (330 sq ft)