The IP should be on the same LAN. 192.168.10.1/24 is the Gateway IP address from the table.
The server cannot use that 10.1 but CAN use 10.2.
VLANs allow network administrators to automatically limit access to a specified group of users by dividing workstations into different isolated LAN segments. When users move their workstations, administrators don't need to reconfigure the network or change VLAN groups.

Explanation
RAID 10 is the RAID level that will yield the best combination of available space and redundancy when configuring a new server for use as a database server with two mirrored drives for the operating system and three drive bays remaining for storage. RAID 10, also known as RAID 1+0, is a RAID configuration that combines disk mirroring and disk striping to protect data. It requires a minimum of four disks and stripes data across mirrored pairs. As long as one disk in each mirrored pair is functional, data can be retrieved. RAID 10 provides high performance, fault tolerance, and fast recovery, but it reduces storage capacity by half. RAID 0 is a RAID configuration that splits data across two or more drives without parity or redundancy. It improves performance but offers no fault tolerance. If one drive fails in RAID 0, all data is lost and the system cannot boot. RAID 1 is a RAID configuration that duplicates data across two or more drives. It provides fault tolerance and improves read performance, but reduces storage capacity by half. If one drive fails in RAID 1, the other drive can continue to operate without data loss or system downtime. RAID 5 is a RAID configuration that stripes data across three or more drives with parity information. It provides fault tolerance and improves performance, but reduces storage capacity by one drive's worth of space. RAID 5 can tolerate one drive failure without data loss, but not two or more. References:
https://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/
https://www.howtogeek.com/202794/what-is-the-difference-between-127.0.0.1-and-0.0.0.0/

Explanation: This option would reduce power consumption and maintenance costs by consolidating the physical servers into virtual machines on the hypervisors. This would also free up space and resources in the data center. The other options would either not address the request, increase power consumption, or require more maintenance.

The best solution to keep a copy of an important fileshare that can be used to restore the share as quickly as possible is to create a snapshot of the fileshare. A snapshot is a point-in-time copy of a file system or a volume that captures the state and data of the fileshare at a specific moment. A snapshot can be created instantly and with minimal overhead, as it only stores the changes made to the fileshare after the snapshot was taken. A snapshot can be used to restore the fileshare to its previous state in case of data loss or corruption.

Application consistent backup is a method of backing up data that ensures the integrity and consistency of the application state. It involves notifying the application to flush its data from memory to disk and quiescing any write operations before taking a snapshot of the data. If the databases were not backed up to be application consistent, they might contain incomplete or corrupted data that cannot be restored properly.
References:
CompTIA Server+ Certification Exam Objectives1, page 12
What is Application Consistent Backup and How to Achieve It2
Application-Consistent Backups3