Fibre Channel is a connectivity option that can transmit at 16Gb over an optical connection for SAN-based shared storage. Fibre Channel is a high-speed network technology that provides reliable and secure data transfer between servers and storage devices. Fibre Channel uses optical fiber cables to connect devices and supports various topologies and protocols. FCoE is another connectivity option that uses Fibre Channel over Ethernet, which encapsulates Fibre Channel frames into Ethernet packets. FCoE can also transmit at 16Gb over an optical connection, but it requires a converged network adapter (CNA) and a lossless Ethernet network. iSCSI is another connectivity option that uses SCSI commands over IP networks, which can use either copper or optical cables. iSCSI can transmit at 10Gb or 40Gb over an optical connection, but it has higher latency and lower performance than Fibre Channel. eSATA is another connectivity option that uses SATA commands over external cables, which are usually copper. eSATA can transmit at 6Gb over a copper connection, but it has limited cable length and device support compared to Fibre Channel. Reference:
https://www.ibm.com/topics/storage-area-network
https://www.techopedia.com/definition/1369/fibre-channel-fc
https://www.techopedia.com/definition/1368/fibre-channel-over-ethernet-fcoe
https://www.techopedia.com/definition/1367/internet-small-computer-system-interface-iscsi
https://www.techopedia.com/definition/1366/external-serial-advanced-technology-attachment-esata

Explanation
This is the most likely cause of preventing the users from accessing the application server because a VLAN is a logical segmentation of a network that isolates traffic based on certain criteria. If the human resources department and the application server are on different VLANs, they will not be able to communicate with each other unless there is a router or a switch that can route between VLANs.References:https://www.cisco.com/c/en/us/support/docs/lan-switching/inter-vlan-routing/41860-howto-L

Explanation
The administrator should use \server%username% to correctly map a script to a home directory for a user based on username. %username% is an environment variable that represents the current user's name on a Windows system. By using this variable in the path of the script, the administrator can dynamically map the script to the user's home directory on the server. For example, if the user's name is John, the script will be mapped to \server\John.