Scripts are written using a shell language. The shell is the server's command-line environment.
The default shell for Linux is bash. Windows has two shells: cmd.exe and PowerShell, although Microsoft emphasizes PowerShell. As a general rule, a script written for one shell, such as PowerShell, will not be understood by another shell, such as bash. The system must have the appropriate shell installed to process the script.
Bash script -- a script written in bash language that contains commands, variables, constructs, and other components. Bash scripts are almost always written for Linux systems.
VBS script -- a script written in the VBScript language. Microsoft has deprecated VBScript, but there have been many VBScript scripts written over the years. VBScript scripts are almost always written for Windows systems.

Explanation
The next action that the administrator should take once the rebuild is finished is to swap the drive and initialize the disk. This is to replace the faulty disk that has a solid amber light, which indicates a predictive failure or a SMART error. Initializing the disk will prepare it for use by the RAID controller and add it to the array. The administrator should also monitor the array status and performance after swapping the drive. Reference:
https://www.salvagedata.com/how-to-rebuild-a-failed-raid/

To calculate the minimum number of disks needed for this application, we need to consider the RAID levels and their disk requirements. RAID 1 requires a minimum of two disks and provides mirroring, which means that data is duplicated on both disks. RAID 5 requires a minimum of three disks and provides striping with parity, which means that data is distributed across all disks with one disk storing parity information for error correction. RAID 5 can tolerate one disk failure without losing data. To create a 10GB RAID 1 array for log files, we need two 10GB disks. To create a 20GB RAID 5 array for data files, we need four 10GB disks (three for data and one for parity). To create a 20GB RAID 5 array for the operating system, we need another four 10GB disks (three for data and one for parity). Therefore, the total number of disks needed is 2 + 4 + 4 = 10. However, since we can use different RAID levels for different partitions on the same disk, we can optimize the disk usage by using only eight disks as follows: Disk 1: 10GB RAID 1 (log files) + 10GB RAID 5 (data files) Disk 2: 10GB RAID 1 (log files) + 10GB RAID 5 (data files) Disk 3: 10GB RAID 5 (data files) + 10GB RAID 5 (OS) Disk 4: 10GB RAID 5 (data files) + 10GB RAID 5 (OS) Disk 5: 10GB RAID 5 (parity for data files) + 10GB RAID 5 (OS) Disk 6: 10GB RAID 5 (OS) + unused space Disk 7: 10GB RAID 5 (parity for OS) + unused space Disk 8: unused space References: https://en.wikipedia.org/wiki/Standard_RAID_levels

A checksum is a value that is calculated from a data set to verify its integrity and authenticity. A checksum can be used to compare a downloaded installation package with the original source to ensure that the package has not been corrupted or tampered with during the download or transmission process. If the checksums match, then the package is safe to install. If the checksums do not match, then the package may be infected with malware or contain errors that could cause installation problems. Therefore, validating the checksum for the downloaded installation package is a necessary step before launching the installation again12
1: CompTIA Server+ Certification Exam Objectives 2: How to Verify File Integrity Using Checksums on Linux

If a server has two arrays on the failed server: a two-drive RAID 0 set for the OS, and an eight-drive RAID 10 set for data, then the most likely failure scenario that caused the server to crash and not boot is that a drive failed in the OS array. RAID 0 is a RAID configuration that stripes data across two or more drives without parity or redundancy. RAID 0 offers high performance but no fault tolerance. If one drive fails in RAID 0, all data is lost and the system cannot boot. RAID 10 is a RAID configuration that combines disk mirroring and disk striping with parity. RAID 10 offers high performance and fault tolerance. RAID 10 can tolerate up to one drive failure per mirrored pair without losing data or functionality. References: https://www.
technewstoday.com/what-is-a-raid-0/ https://www.technewstoday.com/what-is-a-raid-10/