Online Access Free SMI300XS Practice Test

Before you can remove the NVMe backplane (BPN-NVME5-HS219N-S24) from the motherboard tray, what should you do with the hard drives in the system?

• A.Disengage the fans
• B.Disengage the field engineer
• C.Disengage the power supply units (PSUs)
• D.Disengage (but don't remove) all the drives

Exhibit:

There is a flap door over the ribbon cable connection. To open it, use your finger to press down on the top of the flap door and pop it open. True or False?

• A.False
• B.True

You must remove the motherboard tray from the chassis before you can access the NVMe backplane.
True or False?

• A.False
• B.True

Which cable connecting the AOM card to the motherboard is NOT a data cable?

• A.SAS cable
• B.JNCIS1
• C.Power cable
• D.MCIO cables

When lowering the midplane bracket back into the chassis, what should you make sure to do with all the cables?

• A.Move all the cables out of the way as you lower the bracket.
• B.Move only the power cable out of the way as you lower the bracket.
• C.Move only the ribbon cable out of the way as you lower the bracket.
• D.Move only the I2C cable out of the way as you lower the bracket.