Explanation
To enable LUKS on a USB storage device with an ext4 filesystem format, the administrator needs to perform the following steps:
Unmount the device if it is mounted using umount /dev/sdc (D)
Create a partition table on the device using fdisk /dev/sdc (E)
Format the partition with LUKS encryption using cryptsetup luksFormat /dev/sdc1 (H) Open the encrypted partition using cryptsetup luksOpen /dev/sdc1 LUKS0001 Create an ext4 filesystem on the encrypted partition using mkfs.ext4 /dev/mapper/LUKS0001 Mount the encrypted partition using mount /dev/mapper/LUKS0001 /mnt References:
[CompTIA Linux+ Study Guide], Chapter 9: Securing Linux, Section: Encrypting Disks
[How to Encrypt USB Drive on Ubuntu 18.04]

Explanation
To unlock an account that has been locked due to login failures, the administrator can use the command pam_tally2 --user=dev2 --reset (D). This will reset the failure counter for the user "dev2" and allow the user to log in again. The other commands will not unlock the account, but either display or increase the failure count. References:
[CompTIA Linux+ Study Guide], Chapter 4: Managing Users and Groups, Section: Locking Accounts with pam_tally2
[How to Lock and Unlock User Account in Linux]

The administrator should modify the /etc/hosts file and change the db.example.com entry to 192.168.20.88 to address the issue. The /etc/hosts file is a file that maps hostnames to IP addresses on Linux systems. The file can be used to override the DNS resolution and provide a local lookup for hostnames. The dig output shows that the DNS returns the IP address 192.168.20.88 for the hostname db.example.com, which is the correct IP address of the system. The grep output shows that the /etc/hosts file contains an entry for db.example.com with the IP address 192.168.20.89, which is the wrong IP address of the system. This can cause a conflict and prevent the system from being accessed by the hostname. The administrator should modify the /etc/hosts file and change the db.example.com entry to 192.168.20.88, which is the correct IP address of the system. This will align the /etc/hosts file with the DNS and allow the system to be accessed by the hostname. The administrator should modify the /etc/hosts file and change the db.example.com entry to 192.168.20.88 to address the issue. This is the correct answer to the question. The other options are incorrect because they either do not modify the /etc/hosts file (modify the /etc/network file and change the db.example.com entry to
192.168.20.88 or modify the /etc/network file and change the db.example.com entry to 192.168.20.89) or do not change the IP address to the correct one (modify the /etc/hosts file and change the db.example.com entry to 192.168.20.89). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 12:
Managing Network Connections, page 378.

Explanation
The command iptables -F will remediate and help resolve the issue. The issue is caused by the firewall rules that block the access to the organization's web page and other services. The output of dmesg | grep firewall shows that the kernel has dropped packets from the source IP address 192.168.1.100 to the destination port 80, which is the default port for HTTP. The command iptables -F will flush all the firewall rules and allow the traffic to pass through. This command will resolve the issue and restore the access to the web page and other services. The other options are incorrect because they either do not affect the firewall rules (ip route flush or ip addr flush) or do not exist (iptables -R). References: CompTIA Linux+ (XK0-005) Certification Study Guide, Chapter 18: Securing Linux Systems, page 543.

ssh_config: configuration file for the ssh client on the host machine you are running. For example, if you want to ssh to another remote host machine, you use a SSH client. Every settings for this SSH client will be using ssh_config, such as port number, protocol version and encryption/MAC algorithms.
sshd_config: configuration file for the sshd daemon (the program that listens to any incoming connection request to the ssh port) on the host machine. That is to say, if someone wants to connect to your host machine via SSH, their SSH client settings must match your sshd_config settings in order to communicate with you, such as port number, version and so on.