Explanation

Explanation
The correct answer would be FWM (is the process making available communication between SmartConsole applications and Security Management Server.). STATE is T (Terminate = Down) Symptoms
* SmartDashboard fails to connect to the Security Management server.
* Verify if the FWM process is running. To do this, run the command:
[Expert@HostName:0]# ps -aux | grep fwm
* If the FWM process is not running, then try force-starting the process with the following command:
[Expert@HostName:0]# cpwd_admin start -name FWM -path "$FWDIR/bin/fwm" -command "fwm"
[Expert@HostName:0]# ps -aux | grep fwm
[Expert@HostName:0]# cpwd_admin start -name FWM -path "$FWDIR/bin/fwm" -command "fwm"

Check Point Security Gateway and Check Point Security Management require running the First Time Configuration Wizard in order to be configured correctly. The First Time Configuration Wizard is available in Gaia Portal and also through CLI.
To invoke the First Time Configuration Wizard through CLI, run the config_system command from the Expert shell.
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk111119

Explanation
VPN communities are based on Star and Mesh topologies. In a Mesh community, there are VPN connections between each Security Gateway. In a Star community, satellites have a VPN connection with the center Security Gateway, but not to each other.

Configuring Interfaces
Configure the Security Gateway 80 interfaces in the Interfaces tab in the Security Gateway window.
To configure the interfaces:
1. From the Devices window, double-click the Security Gateway 80.
The Security Gateway window opens.
2. Select the Interfaces tab.
3. Select Use the following settings. The interface settings open.
4. Select the interface and click Edit.
The Edit window opens.
5. From the IP Assignment section, configure the IP address of the interface:
1. Select Static IP.
2. Enter the IP address and subnet mask for the interface.
6. In Security Zone, select Wireless, DMS, External, or Internal. Security zone is a type of zone, created by a bridge to easily create segments, while maintaining IP addresses and router configurations. Security zones let you choose if to enable or not the firewall between segments.
Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_SmartProvisioning_WebAdmin/16741.htm