Explanation/Reference:
Explanation:
This procedure captures in a syslog file all failed login attempts.
1. Set up the /etc/default/login file with the desired values for SYSLOG and SYSLOG_FAILED_LOGINS Edit the /etc/default/login file to change the entry. Make sure that SYSLOG=YES is uncommented.
2. Create a file with the correct permissions to hold the logging information.
Create the authlog file in the /var/adm directory.
3. Edit the syslog.conf file to log failed password attempts.
Send the failures to the authlog file.

B: How to Migrate an Existing native Non-Global Zone
Use the V2V process to migrate an existing zone on your Solaris 10 system to a solaris10 brand zone on a system running the Oracle Solaris 11 release.
C: How to Install the solaris10 Branded Zone
A configured solaris10 branded zone is installed by using the zoneadm command with the install subcommand.

Explanation/Reference:
Explanation:
How to Monitor All Failed Login Attempts
This procedure captures in a syslog file all failed login attempts.
Assume the Primary Administrator role, or become superuser.
1. Assume the Primary Administrator role, or become superuser.
2. (C) Set up the /etc/default/login file with the desired values
for SYSLOG and SYSLOG_FAILED_LOGINS
3. (A) Create a file with the correct permissions to hold the logging information.
Create the authlog file in the /var/adm directory.
4. (B) Edit the syslog.conf file to log failed password attempts.

A: -n <svcname>
Uses this install service name instead of default
service name.
B: -i <dhcp_ip_start>
Sets up a new DHCP server. The IP addresses,
starting from dhcp_address_start,are set up.
D: -c <count_of_ipaddr>
Sets up a total number of IP addresses in the
DHCP table equal to the value of the
count_of_ipaddr. The first IP address is the
value of dhcp_ip_start that is provided by the
-i option.
F: -s <srcimage>
Specifies location of AI ISO image to use for
setting up the install service.
<targetdir>
Required: Specifies location to set up net image.

Explanation/Reference:
Explanation:
C: To change the default behavior of the Fast Reboot feature on the SPARC platform, so that a fast reboot is automatically performed when the system reboots, see below.
The following example shows how to set the property's value to true on the SPARC platform, so that a fast reboot is initiated by default:
# svccfg -s "system/boot-config:default" setprop config/fastreboot_default=true
# svcadm refresh svc:/system/boot-config:default
D: Fast Reboot implements an in-kernel boot loader that loads the kernel into memory and then switches to that kernel.
The firmware and boot loader processes are bypassed, which enables the system to reboot within seconds.
The Fast Reboot feature is managed by SMF and implemented through a boot configuration service, svc:/ system/boot-config. The boot-config service provides a means for setting or changing the default boot configuration parameters. When the config/fastreboot_default property is set to true, the system performs a fast reboot automatically, without the need to use the reboot -f command. This property's value is set to true on the x86 platform. For task-related information, including how to change the default behavior of Fast Reboot on the SPARC platform, see Accelerating the Reboot Process on an x86 Based System.
Note: One new feature, called Fast Reboot, will allow the system to boot up without doing the routine set of hardware checks, a move that can make system boot times up to two-and-a-half times faster, Oracle claimed. This feature can be handy in that an administrator applying a patch or software update across thousands of Solaris deployments can reboot them all the more quickly.