When a laptop screen fails to mirror to a television despite being correctly connected via an HDMI cable, a common issue is that the television is set to the wrong input source. Modern televisions have multiple input options (e.g., HDMI 1, HDMI 2, AV, etc.), and selecting the correct input that corresponds to the port the HDMI cable is connected to is essential for displaying the laptop's screen. The blinking logo on the TV screen typically indicates that the TV is functioning but not receiving a signal from the selected input source.
Changing the TV's input to the correct HDMI port should resolve the issue and allow the laptop screen to mirror onto the TV.References: Hardware 1101.docx, "Connecting External Displays" section.

Explanation
The most important factor to consider when upgrading a laptop's RAM is the architecture of the RAM, which determines the type, speed, and capacity of the memory modules. The architecture of the RAM must match the architecture of the laptop's motherboard and processor, otherwise the RAM will not be compatible or function properly. The architecture of the RAM includes the DDR generation (such as DDR3 or DDR4), the form factor (such as SO-DIMM), the pin count (such as 204 or 260), the voltage (such as 1.35V or 1.5V), and the frequency (such as 1600MHz or 2400MHz).
The other options are not as crucial or relevant for the RAM upgrade. The brand of the RAM does not matter as long as the RAM meets the specifications of the laptop and is of good quality. The CAS latency of the RAM is a measure of the delay between the memory controller requesting data and the RAM delivering it, and it affects the performance of the RAM. However, the CAS latency is not a fixed value and can vary depending on the frequency and voltage of the RAM. Therefore, purchasing RAM with the same CAS latency is not necessary or sufficient for compatibility. The laptop's BIOS settings are usually configured to automatically detect and adjust to the RAM upgrade, and do not need to be manually changed by the technician.
References:
CompTIA A+ Certification Exam Core 1 Objectives1
The Official CompTIA A+ Core 1 Student Guide (Exam 220-1101) eBook2
How to Upgrade the RAM in Your Laptop | Tom's Hardware3
How to Upgrade RAM on a Laptop | Crucial.com4

See the explanation below
Explanation
solution as

Explanation
To enable network printing, the firewall needs to open the ports that are used by the network printers and the print servers. Two common ports for network printing are 515 (LDP) and 631 (IPP). LDP stands for Line Printer Daemon Protocol, which is a TCP-based protocol for sending print jobs to a remote printer. IPP stands for Internet Printing Protocol, which is a HTTP-based protocol for managing and monitoring print jobs over the Internet. According to the CompTIA Core1 objectives, one of the network ports that is related to printing is
515. A research paper on network printing also mentions that LDP and IPP are widely used protocols for network printing.