Explanation:
To configure a custom application with Cisco SD-WAN centralized policy, you need to follow these steps25:
Click Configuration, select Policies, and then select Centralized Policy.
Click Custom Options, select Centralized Policy, and then select Lists.
Click Custom Applications, and then select New Custom Application.
Enter a name for the application, enter the match criteria, and then click Add.
The process of configuring a custom application with a Cisco SD-WAN centralized policy using Cisco vManage involves several steps1.
Click Configuration, select Policies, and then select Centralized Policy: This is the first step where you navigate to the Policies section in the Configuration menu of Cisco vManage1.
Click Custom Options, select Centralized Policy, and then select Lists: In this step, you select the Custom Options, then select Centralized Policy, and finally select Lists1.
Click Custom Applications, and then select New Custom Application: After setting up the Lists, you click on Custom Applications and then select New Custom Application1.
Enter a name for the application, enter the match criteria, and then click Add: Finally, you enter a name for the application, specify the match criteria, and then click Add to complete the configuration1.
References :=
Cisco Catalyst SD-WAN Policies Configuration Guide, Cisco IOS XE

Explanation:

The process of configuring an SLA class to specify the maximum packet loss, packet latency, and jitter allowed on a connection using Cisco vManage involves several steps12.
Click Configuration, select Policies, and then select Add Policy: This is the first step where you navigate to the Policies section in the Configuration menu of Cisco vManage1.
Click SLA Class and then click New SLA Class List: In this step, you create a new SLA Class List1.
Select Criteria, select Loss, Latency and Jitter, and then click Add: After setting up the SLA Class List, you select the criteria for the SLA class. In this case, the criteria are Loss, Latency, and Jitter1.
Set values for Loss, Latency, Jitter, and App Probe Class: Finally, you set the values for Loss, Latency, Jitter, and App Probe Class1.
References :=
Information About Application-Aware Routing - Cisco
Policies Configuration Guide for vEdge Routers, Cisco SD-WAN Release 20

Explanation:
Step 1 = Create a Customer Gateway (CGW) in AWS. Step 2 = Create a Virtual Private Gateway (VGW) in AWS. Step 3 = Create a site-to-site VPN connection in AWS. Step 4 = Configure the IOS XE router with the required IPsec VPN parameters and routing settings. Step 5 = Verify and test the VPN connection.
The process of configuring a site-to-site VPN connection between an on-premises Cisco IOS XE router and Amazon Web Services (AWS) involves several steps12.
Create a Customer Gateway (CGW) in AWS: This is the first step where you define the public IP address of your on-premises Cisco IOS XE router in AWS1.
Create a Virtual Private Gateway (VGW) in AWS: This involves creating a VGW and attaching it to the VPC in AWS1.
Create a site-to-site VPN connection in AWS: After setting up the CGW and VGW, you then create a site-to-site VPN connection in AWS. This involves specifying the CGW, VGW, and the static IP prefixes for your on-premises network1.
Configure the IOS XE router with the required IPsec VPN parameters and routing settings: After the AWS side is set up, you configure the on-premises Cisco IOS XE router with the required IPsec VPN parameters and routing settings2.
Verify and test the VPN connection: Finally, you verify and test the VPN connection to ensure that it is working correctly12.
References :=
Configure IOS-XE Site-to-Site VPN Connection to Amazon Web Services - Cisco Community SD-WAN Configuration Example: Site-to-site (LAN to LAN) IPSec between vEdge and Cisco IOS - Cisco Community

Explanation:

Display the time and process information of the device, as well as CPU, memory, and disk usage data. = show sdwan system status1 Validate the configured zone-based firewall. = show policy-firewall config1 Display information about application-aware routing policy matched packet counts on the Cisco IOS XE SD-WAN devices. = show sdwan policy app-route-policy-filter1 View the security information that is configured for IPsec tunnel connections. = show sdwan security-info The commands used to identify issues on a Cisco IOS XE SD-WAN device are as follows1:
show sdwan system status: This command is used to display the time and process information of the device, as well as CPU, memory, and disk usage data1.
show policy-firewall config: This command is used to validate the configured zone-based firewall1.
show sdwan policy app-route-policy-filter: This command is used to display information about application-aware routing policy matched packet counts on the Cisco IOS XE SD-WAN devices1.
show sdwan security-info: This command is used to view the security information that is configured for IPsec tunnel connections1.
References :=
Cisco IOS XE Catalyst SD-WAN Qualified Command Reference
Cisco Catalyst SD-WAN Command Reference
Cisco Catalyst SD-WAN Systems and Interfaces Configuration Guide, Cisco IOS XE SD-WAN Tunnel Interface Commands - Cisco

To redistribute OSPF internal routes into BGP, the engineer needs to configure two commands on router R2.
The first command is router bgp 100, which enables BGP routing process and specifies the autonomous system number of 100. The second command is redistribute ospf 1 match internal external, which redistributes the routes from OSPF process 1 into BGP, and matches both internal and external OSPF routes. This way, the engineer can avoid introducing extra routes that are not part of OSPF process 1, such as the default route or the connected routes. References: = Designing and Implementing Cloud Connectivity (ENCC) v1.0, [ENCC:
Configuring IPsec VPN from Cisco IOS XE to AWS], [Deploying Cisco IOS VTI-Based Point-to-Point IPsec VPNs]