Free Access Cisco.300-510.v2023-09-09.q129 Practice Test (Page 8)

Question 31

What is used by SR-TE to steer traffic through the network?

A.shortest path calculated by IGP

B.dynamic rules

C.path policy

D.explicit maps

Question 32

Refer to the exhibit.

Why is neighbor 10.1.5.5 stuck in "2WAY" state?

A.Router ID 10.1.5.5 is not reachable from R2

B.OSPF authentication has failed between R2 and 10.1.5.5

C.It is an expected behavior when OSPF network type is broadcast

D.OSPF parameters (Area ID or hello interval) are mismatched between R2 and 10.1.5.5

Question 33

Refer to the exhibit.

Refer to the exhibit After recent configuration changes to a customer's network, a network engineer notices that R2 cannot communicate with R3 Both FastEthemet interfaces on R2 and R3 are up and configured with the correct IP addresses MD5 password configured en R2 and R3 match with no issues What is the minimum change the engineer must make to enable R2 and R3 to communicate and fix the problem?

A.Configure a loopback interface on R2 and assign it to area 0.

B.Define area 2 as a NSSA on R2 and R3

C.Configure virtual links between RI and R3.

D.Configure interface F0/0 on RI and R2 to be in area O.

Question 34

Refer to the exhibit.

An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?

A.The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.

B.The MED attribute can be applied on R2 to influence R1 to use it as the primary path.

C.The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.

D.The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.

Question 35

Refer to the exhibit.

VPN users that are connected to PE routers are facing network issues. Traffic that originates from CE1 drops before reaching CE2. An engineer finds no outgoing traffic statistics on PE1 and PE2 routers toward CE devices and finds that the PE1 router is running the older software image. Which action must be implemented to resolve the issues?

A.Enable LDP protocol on PE1 and PE2 routers.

B.Enable CEF-based forwarding on PE1 router.

C.Advertise PE2 router loopback on PE1 in OSPF.

D.Advertise P1 router loopback on PE1 in OSPF.

Other Version: 2244Cisco.300-510.v2025-06-23.q161; 2780Cisco.300-510.v2024-09-24.q207; 2487Cisco.300-510.v2023-06-10.q145; 2907Cisco.300-510.v2022-09-29.q110; 3169Cisco.300-510.v2022-08-02.q105; 4674Cisco.300-510.v2022-02-01.q126; 63Cisco.Actualtestpdf.300-510.v2021-11-18.by.queena.92q.pdf

Latest Upload: 241Snowflake.DEA-C01.v2026-09-04.q215; 163HP.HPE0-V27.v2026-09-04.q127; 188NAHQ.CPHQ.v2026-09-03.q481; 118SAP.C-S4CPB-2602.v2026-09-02.q7; 126Cisco.700-805.v2026-09-02.q86; 164MSSC.CLT-4.0.v2026-09-02.q43; 131Fitness.NCSF-CPT.v2026-09-02.q18; 201Google.Generative-AI-Leader.v2026-09-02.q77; 144PECB.ISO-14001-Lead-Auditor.v2026-09-01.q39; 129Google.GCP-DE.v2026-09-01.q27

Question 31

Question 32

Question 33

Question 34

Question 35

Download PDF File