Free Access Cisco.300-615.v2022-05-28.q107 Practice Test (Page 19)

Question 86

A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?

A.1. Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2. Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3. Check for runtime link down status.
4. Reseat the affected IOM.

B.1. Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2. Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3. Check for runtime link down status.
4. Reseat the affected IOM.

C.1. Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2. Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3. Check for runtime link down status.
4. Reseat the affected IOM.

D.1. Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2. Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3. Check for runtime link down status.
4. Reseat the affected IOM.

Question 87

A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.

Question 88

A server administrator attempts to change the Cisco IMC KVM certificate to one that is signed by a private CA, but the certificate is not accepted. What causes this process to fail?

A.using a certificate with a password-protected private key

B.using RSA encryption in the generation of the certificate

C.using AES encryption in the generation of the certificate

D.omitting the public IP address of the Cisco IMC in the SAN