Free Access Cisco.300-615.v2022-10-01.q126 Practice Test (Page 21)

Question 96

Refer to the exhibit.

An engineer must strictly enforce the port security configuration database in the Fibre Channel fabric. A new device has been connected to the Fibre Channel storage interface that was configured for port security. The port security was enabled for the VSAN that the port belongs to. Despite the configuration, the rogue devices can log into the fabric. Which action resolves the issue?

A.Commit the active database with the port-security database copy vsan 1 command

B.Commit the changes with the port-security commit copy vsan 1 command

C.Disable CFS distribution with the no port-security distribute vsan 1 command

D.Disable auto learn in VSAN 1 with the no port-security auto-learn vsan 1 command

Question 97

An engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to map a read-only role for a specific security domain. Which AV pair solves the problem?

A.shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2

B.shell:domains=Security_Domain_1/Write_Role_1|Read_Role_2

C.shell=Security_Domain_1/Read_Role_1|Read_Role_2

D.shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2

Question 98

Refer to the exhibit.

An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?

A.Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.

B.Set the local group number as 300 in the remote data center configuration

C.Run version 1 and version 2 HSRP on VLAN300 in the local data center.

D.Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.

Question 99

Refer to the exhibit.

A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?

A.Configure the admin port type E on the upstream switch that connects the port.

B.Configure the BB_credit buffers on the upstream switch that connects the port.

C.Replace the SFP port module in fc2/10.

D.Enable NPIV on the upstream switch that connects the port.

Question 100

Refer to the Exhibit.

An Engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolve the issue?

A.Se the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

B.Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.

C.Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

D.Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate.

Other Version: 808Cisco.300-615.v2024-09-25.q117; 1034Cisco.300-615.v2023-01-31.q58; 2686Cisco.300-615.v2022-05-28.q107; 2741Cisco.300-615.v2022-05-03.q107; 93Cisco.Exams4sures.300-615.v2021-11-23.by.tess.99q.pdf

Latest Upload: 203PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 302Nokia.4A0-113.v2026-05-01.q69; 265EC-COUNCIL.312-49v11.v2026-04-30.q214; 230Microsoft.MB-820.v2026-04-30.q101; 213Salesforce.MC-202.v2026-04-30.q57; 207BICSI.INSTC_V8.v2026-04-29.q53; 337NMLS.MLO.v2026-04-28.q82; 245NCARB.Project-Management.v2026-04-28.q27; 466EMC.D-AV-DY-23.v2026-04-27.q184; 1125ServiceNow.CSA.v2026-04-27.q483

Question 96

Question 97

Question 98

Question 99

Question 100

Download PDF File