Explanation
Step 1: Download and install the license file
Procedure
0. Download the snap-in license file from PLDS.
1. On System Manager navigate to Home > Services > Licenses.
2. Select Install License.
3. Browse to the location of the snap-in license.
4. Select the license file and click Open.
5. Click Accept the License Terms & Conditions and click Install.
The system installs the license file.
In the left navigation pane, the system displays the snap-in under Licensed Products.
Step 2: Load the snap-in
Step 3: Install the snap-in
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 15
https://downloads.avaya.com/css/P8/documents/101013939

Explanation
Presence Services snap-in does not require a license to work.
References: Avaya Aura Presence Services Snap-in Reference. Release 7.0.1 (December 2016), page 17
https://downloads.avaya.com/css/P8/documents/101013646

Explanation
Provisioning Avaya Aura Media Server for the WebRTC Snap-in.
Procedure
1. Log in to the Avaya Aura
Media Server Element Manager.
2. Check that Avaya Aura
Media Server nodes and routes are set up correctly.
See Deploying Avaya BreezeTM for details on configuring Avaya Aura
Media Server for Avaya BreezeTM.
3. Go to System Configuration > Server Profile > General Settings, enable Firewall NAT Tunneling Media Processor and then click Save.
4. Go to System Configuration > Signaling Protocols > SIP > General Settings, enable Always use SIP default outbound proxy, and then click Save.
Go to System Configuration > Media Processing > ICE > TURN/STUN Servers > Accounts and create a TURN/STUN account. This account ID and password must match the account created on the Avaya SBCE.
6. Go to System Configuration > Media Processing > ICE > TURN/STUN Servers > Servers to add the TURN/STUN connection to the Avaya SBCE server Etc.
References: Avaya WebRTC Snap-in Reference, Release 3.1 (May 2016), page 23
https://downloads.avaya.com/css/P8/documents/101013939

Explanation
Remote Worker Avaya one-X Communicator Configuration
The following screens illustrate Avaya one-X Communicator administration settings for the Remote Worker used in the reference configuration.
Example:
1. On the Avaya one-X Communicator application running on the PC, click on the Settings icon on the top right to display the Settings window.2. Click on Telephony, the General Settings window will appear. The following values were used in the reference configuration:
Under Using: select SIP (SIP must be selected; H.323 is not supported for Remote Workers).
* Under Server List, click Add (the Add Server window to the right will appear).
* Under Proxy Server enter 192.168.157.180 (This is one of the two "public" IP addresses for interface B1 on the Avaya SBCE used for Remote Worker access to Session Manager (public IP not used for relay services).
Etc.
References: Configuring Remote Workers with Avaya Session Border Controller for Enterprise Rel. 6.2, Avaya Aura Communication Manager Rel. 6.3 and Avaya Aura Session Managers Rel. 6.3 - Issue 1.0, page 81
https://downloads.avaya.com/css/P8/documents/100183254