Section: Information System Acquisition, Development and Implementation

Explanation
The best recommendation to address the problem of missing IT deadlines on important projects because IT resources are not prioritized properly is to implement project portfolio management (PPM). PPM is the process of analyzing and optimizing the costs, resources, technologies, and processes for all the projects and programs within a portfolio. A portfolio is a collection of projects, programs, and processes that are managed together and aligned with the strategic goals and objectives of the organization. PPM can help the organization to:
Prioritize the most valuable and relevant projects and programs based on their alignment with the organizational strategy, vision, and mission.
Balance the portfolio to ensure that the projects and programs are diversified, feasible, and sustainable, and that they meet the needs and expectations of the stakeholders.
Optimize the allocation, utilization, and coordination of IT resources across the portfolio, such as staff, budget, time, equipment, and software.
Monitor and control the performance and progress of the projects and programs within the portfolio, and evaluate their outcomes and benefits.
By implementing PPM, the organization can improve its IT project delivery and avoid missing deadlines. PPM can also help the organization to increase its efficiency, effectiveness, quality, and value. For more information about PPM, you can refer to the following web search results:
Project Portfolio Management (PPM): The Ultimate Guide - ProjectManager1 A Complete Overview of Project Portfolio Management - Smartsheet2 PPM 101: What Is Project Portfolio Management?3

The best recommendation for the IS auditor to facilitate compliance with the new regulation is to include the requirement in the incident management response plan. An incident management response plan is a document that defines the roles, responsibilities, processes, and procedures for responding to security incidents. By including the new regulation in the plan, the IS auditor can ensure that the organization is aware of the reporting obligation, has a clear workflow for notifying the regulator within 24 hours, and has the necessary documentation and evidence to support the report.
The other options are not as effective as including the requirement in the incident management response plan:
* Establishing key performance indicators (KPIs) for timely identification of security incidents is a good practice, but it does not guarantee compliance with the regulation. KPIs are metrics that measure the performance of a process or activity, but they do not specify how to perform it. The IS auditor should also provide guidance on how to identify and report security incidents within 24 hours.
* Engaging an external security incident response expert for incident handling is a possible option, but it may not be feasible or cost-effective. The organization may not have the budget or time to hire an external expert, or may prefer to handle the incidents internally. The IS auditor should also evaluate the qualifications and trustworthiness of the external expert, and ensure that they comply with the regulation and other contractual or legal obligations.
* Enhancing the alert functionality of the intrusion detection system (IDS) is a useful measure, but it is not sufficient to comply with the regulation. An IDS is a tool that monitors network traffic for malicious activity and alerts the network administrator or takes preventive action. However, an IDS may not detect all types of security incidents, or may generate false positives or negatives. The IS auditor should also consider other sources of incident detection, such as logs, reports, audits, or user feedback.

4GLs are usually not suitable for data intensive operations. Instead, they are used mainly for graphic user interface (GUI) design or as simple query/report generators.

Explanation/Reference:
The word INCORRECTLY is the keyword used in the question. You need to find out the functionality that is not performed by LAN or WAN layer in TCP/IP model.
The Network layer of a TCP/IP model provides logical addressing which routers use for path determination.
For your exam you should know below information about TCP/IP model:
Network Models

Layer 4. Application Layer
Application layer is the top most layer of four layer TCP/IP model. Application layer is present on the top of the Transport layer. Application layer defines TCP/IP application protocols and how host programs interface with Transport layer services to use the network.
Application layer includes all the higher-level protocols like DNS (Domain Naming System), HTTP (Hypertext Transfer Protocol), Telnet, SSH, FTP (File Transfer Protocol), TFTP (Trivial File Transfer Protocol), SNMP (Simple Network Management Protocol), SMTP (Simple Mail Transfer Protocol) , DHCP (Dynamic Host Configuration Protocol), X Windows, RDP (Remote Desktop Protocol) etc.
Layer 3. Transport Layer
Transport Layer is the third layer of the four layer TCP/IP model. The position of the Transport layer is between Application layer and Internet layer. The purpose of Transport layer is to permit devices on the source and destination hosts to carry on a conversation. Transport layer defines the level of service and status of the connection used when transporting data.
The main protocols included at Transport layer are TCP (Transmission Control Protocol) and UDP (User Datagram Protocol).
Layer 2. Internet Layer
Internet Layer is the second layer of the four layer TCP/IP model. The position of Internet layer is between Network Access Layer and Transport layer. Internet layer pack data into data packets known as IP datagram's, which contain source and destination address (logical address or IP address) information that is used to forward the datagram's between hosts and across networks. The Internet layer is also responsible for routing of IP datagram's.
Packet switching network depends upon a connectionless internetwork layer. This layer is known as Internet layer. Its job is to allow hosts to insert packets into any network and have them to deliver independently to the destination. At the destination side data packets may appear in a different order than they were sent. It is the job of the higher layers to rearrange them in order to deliver them to proper network applications operating at the Application layer.
The main protocols included at Internet layer are IP (Internet Protocol), ICMP (Internet Control Message Protocol), ARP (Address Resolution Protocol), RARP (Reverse Address Resolution Protocol) and IGMP (Internet Group Management Protocol).
Layer 1. Network Access Layer
Network Access Layer is the first layer of the four layer TCP/IP model. Network Access Layer defines details of how data is physically sent through the network, including how bits are electrically or optically signaled by hardware devices that interface directly with a network medium, such as coaxial cable, optical fiber, or twisted pair copper wire.
The protocols included in Network Access Layer are Ethernet, Token Ring, FDDI, X.25, Frame Relay etc.
The most popular LAN architecture among those listed above is Ethernet. Ethernet uses an Access Method called CSMA/CD (Carrier Sense Multiple Access/Collision Detection) to access the media, when Ethernet operates in a shared media. An Access Method determines how a host will place data on the medium.
IN CSMA/CD Access Method, every host has equal access to the medium and can place data on the wire when the wire is free from network traffic. When a host wants to place data on the wire, it will check the wire to find whether another host is already using the medium. If there is traffic already in the medium, the host will wait and if there is no traffic, it will place the data in the medium. But, if two systems place data on the medium at the same instance, they will collide with each other, destroying the data. If the data is destroyed during transmission, the data will need to be retransmitted. After collision, each host will wait for a small interval of time and again the data will be retransmitted.
Protocol Data Unit (PDU) :
Protocol Data Unit - PDU

The following answers are incorrect:
The other options correctly describe functionalities of application layer in TCP/IP model.
The following reference(s) were/was used to create this question:
CISA review manual 2014 page number 272