I see the following information on a router MSR-1:
[MSR-1]display arp all
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Interface Aging Type
168.0.2 0123-4321-1234 N/A GE0/0 20 D After checking that the host has a large number of viruses, now the customer wants to prohibit the message sent by the host from passing through MSR-1, then _______. (Multiple choice)

The IP address 10.0.10.32 and the mask 255.255.255.224 represent a ______.

The customer's network connection is shown in the figure.

Among them, the IP addresses of RTA, RTB, and RTC are respectively 2.2.2.1/24, 2.2.2.2/24, 2.2.2.3/24. To realize the intercommunication between RTA, RTB and RTC, configure the following frame relay MAP on RTA correct ?

The switch SWA port Ethernet1/0/1 was originally an Access port type, and now it needs to be configured as a Hybrid port type. Which of the following commands is the correct configuration command?

The following ACL is configured on a router:
acl number 2000 match-order auto
rule 0 deny
rule 5 permit source 192.168.9.0 0.0.7.255
Assuming that the ACL is applied on the right interface and in the right direction, then ______. (Multiple choice)