Among the following statements about PBR (polic-based-route) load sharing applications, the correct one is ______________.

Execute displaip policy-based-route statistic interface ethernet1/0 on the router, and the output is as follows:
Interface Ethernet1/0 policbased routing statistics information :
policy-based-route : aaa
permit node 5
apploutput-interface serial1/0
Denied : 0 , Forwarded : 0
Total denied : 0 , forwarded : 0
According to the above output, it can be seen that ______.

In the IS-IS network shown in the figure, RTA and RTB are configured as follows:
RTA]isis
RTA-isis-1]is-level level-1
RTA-isis-1]network-entit01.1111.1111.1111.00
RTA-isis-1]interface serial 2/0
RTA-Serial2/0]isis enable 1
RTB]isis
RTB-isis-1]network-entit01.2222.2222.2222.00
RTB-isis-1]interface serial 1/0
RTB-Serial1/0]isis enable 1
RTB-Serial1/0]isis circuit-level level-1
Then between RTA and RTB ______

The routers RTA and RTB belong to different autonomous systems. The BGP related configuration is as follows, then between RTA and RTB ______.
RTA]
bgp 65001
timer keepalive 15 hold 45
peerRTB as-number 65001
RTB]
bgp 65002
timer keepalive 10 hold 30
peerRTA as-number 65002

In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA-LoopBack0] ip address 1.1.1.1 255.255.255.255
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTA-ospf-1]import-route direct
RTA-ospf-1]default-route-advertise alwa
RTB-LoopBack0] ip address 2.2.2.2 255.255.255.255
RTB]ospf 1
RTB-ospf-1]area 1
rtb-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
rtb-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
RTB-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
RTC-LoopBack0] ip address 3.3.3.3 255.255.255.255
rtc]ospf 1
RTC-ospf-1]area 0
RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
rtc-ospf-1-area-0.0.0.2]network 3.3.3.3 0.0.0.0
rtc-ospf-1-area-0.0.0.0]area 2
RTC-ospf-1-area-0.0.0.2]nssa no-summarRTC-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
RTD-LoopBack0] ip address 4.4.4.4 255.255.255.255
RTD]ospf 1
RTD-ospf-1]area 2
RTD-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
rtd-ospf-1-area-0.0.0.2]nssa
RTD-ospf-1]import-route direct
Which of the following routes _______ cannot exist in the RTD's routing table.