Question 191
The electrical performance indicators of Antenna do not include ().
Question 192
An engineer received a customer complaint, the signal in the room was not good. The engineer suspected that the channel interference was serious. Use the following command to view the AP RF information in the room and get the following output. Which of the following statement is wrong?
[[AC6605] display radio ap-id 0
CH/BW: Channel/Bandwidth
CE: Current EIRP (dBm)
ME: Max EIRP (dBm)
CU: Channel utilization
---------------------------------------------------------------------------------------------------------------
AP ID Name RfID Band Type Status CH/BW CE/ME STA CU
0 ap-2 0 2.4G bgn on 1/20M 27/27 0 31%
0 ap-2 0 5G an on 149/20M 28/28 0 2%
---------------------------------------------------------------------------------------------------------------
Total: 2
[[AC6605] display radio ap-id 0
CH/BW: Channel/Bandwidth
CE: Current EIRP (dBm)
ME: Max EIRP (dBm)
CU: Channel utilization
---------------------------------------------------------------------------------------------------------------
AP ID Name RfID Band Type Status CH/BW CE/ME STA CU
0 ap-2 0 2.4G bgn on 1/20M 27/27 0 31%
0 ap-2 0 5G an on 149/20M 28/28 0 2%
---------------------------------------------------------------------------------------------------------------
Total: 2
Question 193
According to the following configuration example, the following statement is correct.
[AC] dhcp enable [AC] interface VLANif100
[AC-VLANif100] ip address 10.1.100.1 24
[AC-VLANif100] dhcp select interface
[AC-VLANif100] quit
[AC] dhcp enable [AC] interface VLANif100
[AC-VLANif100] ip address 10.1.100.1 24
[AC-VLANif100] dhcp select interface
[AC-VLANif100] quit
Question 194
If a wireless client connecting the same SSID wants to roam from one AP to another, what is the area of the signal overlap between the two APs?
Question 195
If a wireless client is connected to the same SSID of two APs, then what determines which wireless AP the wireless terminal is connected to?