Free Access Huawei.H31-124_v2.0.v2022-09-20.q36 Practice Test (Page 5)

Question 16

The following commands ate configured on the router running BGP:
bgp 100
peer 12.12.12.2 as-number 200
ipv4familyunicast
network 1,1.1.1 255.255.255.255
undo synchronization
peer 12.12.12.2 enable
peer 12.12.12.2 next-hop-local
The IP address of the router's interface connected with peer 12.12.12.2 is 12.12.12.1. What's the function of the command "peer
12.12.12.2 next-hop-local"?

A.Change the next hop of the routes generated locally as 12.12.12.1

B.Change the next hop of the routes received from peer 12.12.12.2 as 12.12.12.2

C.Change the next hop of the routes advertised to peer 12.12.12.2 as 12.12.12.1

D.This command does not work at all

Question 17

Is the following statement correct or incorrect? Because a bypass tunnel Is manually created during TE FRR configuration, the constraint shortest path first (CSPF) does not need to be enabled.

A.True

B.False

Question 18

Which of the following statements about traffic policy In CBQ configuration are correct?

A.The traffic policy applied to some interface can not be deleted.

B.Traffic policy is used to bind traffic classifier with traffic behavior.

C.Traffic policy nesting means one QoS policy contains another QoS policy, the behavior of the parent policy Is a sub-policy.

D.Traffic policy can be nested infinitely.

Question 19

The IGMP snooping configuration is as follows:
#
vlan batch 3
#
igmp-snooping enable
#
vlan 3
igmp-snooping enable
#
interface GigabitEthernet1/0/1
port hybrid tagged vlan 3
I2-multicast static-group group-address 225.1.1.1 to 225.1.1.3 vlan 3
#
interface GigabitEthernet3/0/1
port hybrid tagged vlan 3
igmp-snooplng static-router-port vlan 3
Which of the following statements are correct?

A.IGMP snooping has been enabled on the switch.

B.The device connected to GE 3/0/1 Is a multicast router.

C.The device connected to GE 1/0/1 can receive multicast traffic only for the multicast groups 225.1.1.1 to
225.1.1.3. because static multicast groups are configured on GE 1/0/1.

D.The device connected to GE 1/0/1 can send Report messages to receive multicast data 'or multicast groups outside the 225.1.1.1 to 225.1-1.3 range.

Question 20

Which of the following statements regarding the description of LDP is incorrect?

A.In MPLS, LDP is used to implement label distribution, label control and label retention.

B.Between two LSRs that run LDP, the LDP session is established and Label/FEC mapping information is exchanged.

C.The UDP and TCP port number for LDP is 64.

D.The two routers between which LDP session is established are called LDP Peer.

Other Version: 1214Huawei.H31-124_v2.0.v2022-08-14.q36; 1332Huawei.H31-124_v2.0.v2022-04-21.q34; 33Huawei.Trainingdump.H31-124_v2.0.v2021-11-04.by.victoria.35q.pdf

Latest Upload: 247PaloAltoNetworks.NGFW-Engineer.v2026-05-01.q43; 360Nokia.4A0-113.v2026-05-01.q69; 395EC-COUNCIL.312-49v11.v2026-04-30.q214; 296Microsoft.MB-820.v2026-04-30.q101; 247Salesforce.MC-202.v2026-04-30.q57; 266BICSI.INSTC_V8.v2026-04-29.q53; 395NMLS.MLO.v2026-04-28.q82; 274NCARB.Project-Management.v2026-04-28.q27; 493EMC.D-AV-DY-23.v2026-04-27.q184; 1292ServiceNow.CSA.v2026-04-27.q483

Question 16

Question 17

Question 18

Question 19

Question 20

Download PDF File