Question 42
RTA is a leaf router that directly connects to host A through interface GigabitEthernet 1/0/0. The interface is configured as follows:
interface GigabitEthernet1/0/0
undo shutdown
ip address 192.168.4.2 255.255.255.0
pim sm
igmp enable
igmp version 3igmp ssm-mapping enable
igmp static-group 232.1.1.1
Configurations in the IGMP view are as follows:
igmp
ssm-mapping 232.1.1.0 255.255.255.0 10.10.1.1
ssm-mapping 232.1.2.0 255.255.255.0 10.10.1.1
Host A sends an IGMPv2 Report message to group 232.1.2.2. Which entry can be displayed by the display igmp ssm-mapping group command?
interface GigabitEthernet1/0/0
undo shutdown
ip address 192.168.4.2 255.255.255.0
pim sm
igmp enable
igmp version 3igmp ssm-mapping enable
igmp static-group 232.1.1.1
Configurations in the IGMP view are as follows:
igmp
ssm-mapping 232.1.1.0 255.255.255.0 10.10.1.1
ssm-mapping 232.1.2.0 255.255.255.0 10.10.1.1
Host A sends an IGMPv2 Report message to group 232.1.2.2. Which entry can be displayed by the display igmp ssm-mapping group command?
Question 43
When the RSVP LSP FRR protection is enables, which of the following statements about the original RSVP LSP are true?
Question 44
Which of the following statements about the working principle f LDAP FRR are true?
Question 45
Which statement about the OSPF VPN is true? (B)
Question 46
<Quidway>display current-configuration
multicast routing-enable
#
acl number 2000
rule 5 permit source 225.0.0.0 0.0.0.255
#
interface Ethernet6/1/0
ip address 10.1.1.1 255.255.255.0
igmp enable
pim sm
#
igmp
#
pim
ssm-policy 2000
#
return
The preceding are partial multicast router configurations. Which of the following configurations are required to configure the SSM Mapping on Ethernet 6/1/0 and map IGMPv2 Report messages for multicast group 225.0.0.1 to multicast source 2.2.2.2?
multicast routing-enable
#
acl number 2000
rule 5 permit source 225.0.0.0 0.0.0.255
#
interface Ethernet6/1/0
ip address 10.1.1.1 255.255.255.0
igmp enable
pim sm
#
igmp
#
pim
ssm-policy 2000
#
return
The preceding are partial multicast router configurations. Which of the following configurations are required to configure the SSM Mapping on Ethernet 6/1/0 and map IGMPv2 Report messages for multicast group 225.0.0.1 to multicast source 2.2.2.2?
