A.DLCI numbers, VPI/VCI values, and VLAN tags are physical parameters.

B.IPv4 and IPv6 addresses are configured under the logical unit.

C.MTU and speed must be configured under the logical unit.

D.Physical parameters such as MTU, duplex mode, and speed are configured under the interface name.

A.Firewall filters provide stateless security.

B.Firewall filters are applied to security policies

C.Firewall filters provide stateful security.

D.Firewall filters are applied to interfaces.

A.The traffic is counted and accepted

B.The traffic is counted and rejected

C.The traffic is only accepted

D.The traffic is only rejected

A.The PFE uses the routing table provided by the RE.

B.The PFE performs a destination lookup based on its own routing table.

C.The PFE uses the following table provided by the RE.

D.The PFE determines network destinations itself based on the RE's routing table.

A.An IPv6 address consists of 128 bits grouped into eight 16-bit hexadecimal sections

B.An IPv6 address consists of 128 bits grouped into sixteen 8-bit hexadecimal sections

C.An IPv6 address consists of 64 bits grouped into eight 8-bit hexadecimal sections

D.An IPv6 address consists of 64 bits grouped into four 16-bit hexadecimal sections