Question 446
A user is unable to connect to a server in another building. A technician is troubleshooting the issue and determines the following:
1) Client PC 1 has an IP address if 192.168.10.25/25
2) PC 1 can successfully ping its gateway of 192.168.10.1/25 which is an interface of router A
3) Server A is named 'BLDGBFILESRVR01' and has an IP address of 192.168.10.145/25
4) PC 2 with an IP address of 192.168.10.200/25 can successfully ping server A However, when PC 1 pings server A, it receives a destination host unreachable responds. Which of the following is the MOST likely cause?
1) Client PC 1 has an IP address if 192.168.10.25/25
2) PC 1 can successfully ping its gateway of 192.168.10.1/25 which is an interface of router A
3) Server A is named 'BLDGBFILESRVR01' and has an IP address of 192.168.10.145/25
4) PC 2 with an IP address of 192.168.10.200/25 can successfully ping server A However, when PC 1 pings server A, it receives a destination host unreachable responds. Which of the following is the MOST likely cause?
Question 447
Workstations are unable to access the Internet after a recent power outage. Configure the appropriate devices to ensure ALL workstations have Internet connectivity.
Instructions: All ports can be enabled (green) or disabled (red). When you have completed the simulation please select the Done button.
Instructions: All ports can be enabled (green) or disabled (red). When you have completed the simulation please select the Done button.
Question 448
Lab Simulation
Wireless network users recently began experiencing speed and performance issues after access point 2 (AP2) was replaced due to faulty hardware.
The original network was installed according to a consultant's specifications and has always worked without a problem.
You, a network technician, have been tasked with evaluating the situation and resolving the issues to improve both performance and connectivity.
Refer to the following diagram and perform any NECESSARY changes to the wireless and wired infrastructure by adjusting devices.
Note: Adjust the LEAST number of devices needed to fix the issue, all blue icons in the image are clickable.
When you feel the simulation is complete please select the Done button.
Wireless network users recently began experiencing speed and performance issues after access point 2 (AP2) was replaced due to faulty hardware.
The original network was installed according to a consultant's specifications and has always worked without a problem.
You, a network technician, have been tasked with evaluating the situation and resolving the issues to improve both performance and connectivity.
Refer to the following diagram and perform any NECESSARY changes to the wireless and wired infrastructure by adjusting devices.
Note: Adjust the LEAST number of devices needed to fix the issue, all blue icons in the image are clickable.
When you feel the simulation is complete please select the Done button.
Question 449
A network technician needs to configure a device with an embedded OS so it can be connected to a wireless handheld scanner Which of the following technologies should be configured on the OS to create the wireless connection?
Question 450
A technician has been called about intermittent connectivity near IDF 2. Multiple cables were recently pulled through a common conduit. Which of the following is MOST likely the cause of the problem?