Which of the following techniques can be configured on a server for network redundancy?
Correct Answer: D
Explanation Teaming is a technique that can be configured on a server for network redundancy. Teaming involves combining two or more network adapters into a single logical unit that acts as one network interface. This way, if one network adapter fails, another one can take over without disrupting network connectivity. Teaming can also improve network performance by load balancing traffic across multiple network adapters. Clustering is a technique that involves grouping two or more servers together to act as one system for high availability and fault tolerance. Virtualizing is a technique that involves creating multiple virtual machines on a single physical server to optimize resource utilization and flexibility. Cloning is a technique that involves creating an exact copy of a server's configuration and data for backup or migration purposes. References: https://docs.microsoft.com/en-us/windows-server/networking/technologies/nic-teaming/nic-teaming https://www.techopedia.com/definition/19588/clustering https://www.techopedia.com/definition/4790/virtualization https://www.techopedia.com/definition/4776/cloning
Question 272
An application needs 10GB of RAID 1 for log files, 20GB of RAID 5 for data files, and 20GB of RAID 5 for the operating system. All disks will be 10GB in capacity. Which of the following is the MINIMUM number of disks needed for this application?
Correct Answer: C
To calculate the minimum number of disks needed for this application, we need to consider the RAID levels and their disk requirements. RAID 1 requires a minimum of two disks and provides mirroring, which means that data is duplicated on both disks. RAID 5 requires a minimum of three disks and provides striping with parity, which means that data is distributed across all disks with one disk storing parity information for error correction. RAID 5 can tolerate one disk failure without losing data. To create a 10GB RAID 1 array for log files, we need two 10GB disks. To create a 20GB RAID 5 array for data files, we need four 10GB disks (three for data and one for parity). To create a 20GB RAID 5 array for the operating system, we need another four 10GB disks (three for data and one for parity). Therefore, the total number of disks needed is 2 + 4 + 4 = 10. However, since we can use different RAID levels for different partitions on the same disk, we can optimize the disk usage by using only eight disks as follows: Disk 1: 10GB RAID 1 (log files) + 10GB RAID 5 (data files) Disk 2: 10GB RAID 1 (log files) + 10GB RAID 5 (data files) Disk 3: 10GB RAID 5 (data files) + 10GB RAID 5 (OS) Disk 4: 10GB RAID 5 (data files) + 10GB RAID 5 (OS) Disk 5: 10GB RAID 5 (parity for data files) + 10GB RAID 5 (OS) Disk 6: 10GB RAID 5 (OS) + unused space Disk 7: 10GB RAID 5 (parity for OS) + unused space Disk 8: unused space Reference: https://en.wikipedia.org/wiki/Standard_RAID_levels
Question 273
Which of the following would MOST likely be part of the user authentication process when implementing SAML across multiple applications?
A technician is attempting to reboot a remote physical Linux server. However, attempts to command a shutdown -----now result in the loss of the SSH connection. The server still responds to pings. Which of the following should the technician use to command a remote shutdown?
Correct Answer: C
Explanation An IDRAC (Integrated Dell Remote Access Controller) is a tool that can be used to command a remote shutdown of a physical Linux server. An IDRAC is a hardware device that provides out-of-band management for Dell servers. It allows the technician to access the server's console, power cycle, reboot, or shut down the server remotely using a web interface or a command-line interface. An IDRAC does not depend on the operating system or network connectivity of the server. A virtual serial console is a tool that can be used to access a remote virtual machine's console using a serial port connection. A KVM (Keyboard, Video, Mouse) switch is a device that allows the technician to switch between different computer sources using the same keyboard, monitor, and mouse. A crash cart is a mobile unit that contains a keyboard, monitor, mouse, and other tools that can be connected to a physical server for troubleshooting purposes. References: https://www.dell.com/support/kbdoc/en-us/000131486/understanding-the-idrac https://www.howtogeek.com/799968/what-is-a-kvm-switch/https://www.techopedia.com/definition/1032/busines
Question 275
A large number of connections to port 80 is discovered while reviewing the log files on a server. The server is not functioning as a web server. Which of the following represent the BEST immediate actions to prevent unauthorized server access? (Choose two.)
Correct Answer: C,D
You want to identify all open ports and disable the unneeded ones. Only way to do that is with a port scan. Running an audit is not an immediate preventative measure.
