Very long instruction word (VLIW) describes a computer processing architecture in which a language compiler or pre-processor breaks program instruction down into basic operations that can be performed by the processor in parallel (that is, at the same time). These operations are put into a very long instruction word which the processor can then take apart without further analysis, handing each operation to an appropriate functional unit.
The following answer are incorrect:
The term "CISC" (complex instruction set computer or computing) refers to computers designed with a full set of computer instructions that were intended to provide needed capabilities in the most efficient way. Later, it was discovered that, by reducing the full set to only the most frequently used instructions, the computer would get more work done in a shorter amount of time for most applications. Intel's Pentium microprocessors are CISC microprocessors.
The PowerPC microprocessor, used in IBM's RISC System/6000 workstation and Macintosh computers, is a RISC microprocessor. RISC takes each of the longer, more complex instructions from a CISC design and reduces it to multiple instructions that are shorter and faster to process. RISC technology has been a staple of mobile devices for decades, but it is now finally poised to take on a serious role in data center servers and server virtualization. The latest RISC processors support virtualization and will change the way computing resources scale to meet workload demands.
A superscalar CPU architecture implements a form of parallelism called instruction level parallelism within a single processor. It therefore allows faster CPU throughput than would otherwise be possible at a given clock rate. A superscalar processor executes more than one instruction during a clock cycle by simultaneously dispatching multiple instructions to redundant functional units on the processor. Each functional unit is not a separate CPU core but an execution resource within a single CPU such as an arithmetic logic unit, a bit shifter, or a multiplier.
Reference(s) Used for this question:
http://whatis.techtarget.com/definition/0,,sid9_gci214395,00.html and http://searchcio-midmarket.techtarget.com/definition/CISC and http://en.wikipedia.org/wiki/Superscalar

Source: TIPTON, Harold F. & KRAUSE, MICKI, Information Security Management Handbook, 4th Edition, Volume 1, Property Insurance overview, Page 589.

Baselines provide the minimum level of security necessary throughout the
organization.
Standards specify how hardware and software products should be used throughout the
organization.
Procedures are detailed step-by-step instruction on how to achieve certain tasks.
Guidelines are recommendation actions and operational guides to personnel when a
specific standard does not apply.
Source: HARRIS, Shon, All-In-One CISSP Certification Exam Guide, McGraw-
Hill/Osborne, 2002, chapter 3: Security Management Practices (page 94).

Explanation/Reference:
RFC 2828 (Internet Security Glossary) defines the Internet Message Access Protocol, version 4 (IMAP4) as an Internet protocol by which a client workstation can dynamically access a mailbox on a server host to manipulate and retrieve mail messages that the server has received and is holding for the client.
IMAP4 has mechanisms for optionally authenticating a client to a server and providing other security services.
MIME is the MultiPurpose Internet Mail Extension. MIME extends the format of Internet mail to allow non- US-ASCII textual messages, non-textual messages, multipart message bodies, and non-US-ASCII information in message headers.
Simple Mail Transfer Protocol (SMTP) is a TCP-based, application-layer, Internet Standard protocol for moving electronic mail messages from one computer to another.
Privacy Enhanced Mail (PEM) is an Internet protocol to provide data confidentiality, data integrity, and data origin authentication for electronic mail.
Source: SHIREY, Robert W., RFC2828: Internet Security Glossary, may 2000.

Explanation/Reference:
Auxiliary station alarms automatically cause an alarm originating in a data center to be transmitted over the local municipal fire or police alarm circuits for relaying to both the local police/fire station and the appropriate headquarters. They are usually Municipal Fire Alarm Boxes are installed at your business or building, they are wired directly into the fire station.
Central station alarms are operated by private security organizations. It is very similar to a proprietary alarm system (see below). However, the biggest difference is the monitoring and receiving of alarm is done off site at a central location manned by non staff members. It is a third party.
Proprietary alarms are similar to central stations alarms except that monitoring is performed directly on the protected property. This type of alarm is usually use to protect large industrials or commercial buildings.
Each of the buildings in the same vincinity has their own alarm system, they are all wired together at a central location within one of the building acting as a common receiving point. This point is usually far away from the other building so it is not under the same danger. It is usually man 24 hours a day by a trained team who knows how to react under different conditions.
A remote station alarm is a direct connection between the signal-initiating device at the protected property and the signal-receiving device located at a remote station, such as the fire station or usually a monitoring service. This is the most popular type of implementation and the owner of the premise must pay a monthly monitoring fee. This is what most people use in their home where they get a company like ADT to receive the alarms on their behalf.
A remote system differs from an auxiliary system in that it does not use the municipal fire of police alarm circuits.
Reference(s) used for this question:
ANDRESS, Mandy, Exam Cram CISSP, Coriolis, 2001, Chapter 11: Physical Security (page 211).
and
Great presentation J.T.A. Stone on SlideShare