Section: Access Control
Explanation/Reference:
Access controls are meant to protect facilities and computers as well as people.
In some situations, the objectives of physical access controls and the protection of people's lives may come into conflict. In theses situations, a person's life always takes precedence.
Many physical security controls make entry into and out of a facility hard, if not impossible. However, special consideration needs to be taken when this could affect lives. In an information processing facility, different types of locks can be used and piggybacking should be prevented, but the issue here with automatic locks is that they can either be configured as fail-safe or fail-secure.
Since there should only be one access door to an information processing facility, the automatic lock to the only door to a man-operated room must be configured to allow people out in case of emergency, hence to be fail- safe (sometimes called fail-open), meaning that upon fire alarm activation or electric power failure, the locking device unlocks. This is because the solenoid that maintains power to the lock to keep it in a locked state fails and thus opens or unlocks the electronic lock.
Fail Secure works just the other way. The lock device is in a locked or secure state with no power applied.
Upon authorized entry, a solinoid unlocks the lock temporarily. Thus in a Fail Secure lock, loss of power of fire alarm activation causes the lock to remain in a secure mode.
Reference(s) used for this question:
Harris, Shon (2012-10-18). CISSP All-in-One Exam Guide, 6th Edition (p. 451). McGraw-Hill. Kindle Edition.
and
Hernandez CISSP, Steven (2012-12-21). Official (ISC)2 Guide to the CISSP CBK, Third Edition ((ISC)2 Press) (Kindle Locations 20249-20251). Auerbach Publications. Kindle Edition.

The last login message displays the last login date and time, allowing a user
to discover if their account was used by someone else. Hence, this is rather a detective
control.
Source: RUSSEL, Deborah & GANGEMI, G.T. Sr., Computer Security Basics, O'Reilly,
July 1992 (page 63).

A Trivial File Transfer Protocol (TFTP) server can be used when configuring
network devices to transfer configurations to and from network devices. Many networking
devices now support TFTP.
Source: KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the
Ten Domains of Computer Security, John Wiley & Sons, 2001, Chapter 3:
Telecommunications and Network Security (page 73).

Identification and authentication is a technical measure that prevents unauthorized people (or unauthorized processes) from entering an IT system. Access control usually requires that the system be able to identify and differentiate among users. Reporting incidents is more related to incident response capability (operational control) than to identification and authentication (technical control). Source: SWANSON, Marianne, NIST Special Publication 800-26, Security Self-Assessment Guide for Information Technology Systems, November 2001 (Pages A-30 to
A-32).

Explanation/Reference:
The Data/Information Owner is ultimately responsible for the protection of the data. It is the Data/ Information Owner that decides upon the classifications of that data they are responsible for.
The data owner decides upon the classification of the data he is responsible for and alters that classification if the business need arises.
The following answers are incorrect:
Security Administrator. Is incorrect because this individual is responsible for ensuring that the access right granted are correct and support the polices and directives that the Data/Information Owner defines.
User. Is Incorrect because the user uses/access the data according to how the Data/Information Owner defined their access.
Auditor. Is incorrect because the Auditor is responsible for ensuring that the access levels are appropriate.
The Auditor would verify that the Owner classified the data properly.
References:
CISSP All In One Third Edition, Shon Harris, Page 121