A.The "no shutdown" command must be configured for the VPRN to be operationally UP.

B.The router-id command should not be used in this context.

C.The VPRN ID must match the value used in the vrf-target command.

D.The VPRN ID must match the value used in the route-distinguisher command.

A.Update

B.Notification

C.OpenSent

D.Route-Refresh

E.Keepalive

A.It will be placed into the customer VRF and require an export policy to be placed into the BGP table if a protocol other than BGP is used as the PE-CE protocol

B.It will be placed into the customer VRF and require an export policy to be propagated to the BGP table if RIP is used as the PE-CE protocol

C.It will be placed into the customer VRF and automatically propagated into the BGP table

D.It will be placed into the customer VRF and require an export policy to be propagated to the BGP table

E.It will be placed into the customer VRF and then be propagated to the BGP table only if BGP is used as the PE-CE protocol

A.The address family between the peers should be VPN-IPv4 instead of IPv4.

B.The omitted AS number under "BGP summary" must be equal to 64496.

C.The neighbor shown is an ASBR router.

D.The neighbor address cannot be the interface address 10.3.4.4.

A.UDP traffic is placed in queue 3 while ICMP traffic is placed in queue 5.

B.All AF traffic will be marked "in-profile" at the SAP-ingress.

C.All TCP traffic will be mapped to forwarding class EF

D.Traffic that does not match any of the IP criteria will be placed in queue 3.

E.EF traffic will receive higher scheduling priority than H2 traffic.